V . C O M F O R T A D J U S T M E N T S
Manual Recline Seatback Adjustment
If your power chair is equipped with a manual recline seatback, you can adjust the seatback angle with the seatback release lever. The lever is located on the right side of the seat base. See figure 9.
To adjust the recline angle:
1.Pull up on the seatback release lever.
2.Lean forward or backward to the desired position.
3.Release the lever.
Armrest Width Adjustment
You can change each armrest’s width independently of the other.
NOTE: Changing the armrest width may increase the overall width of your power chair.
To change the armrest width:
1.Locate the armrest width adjustment setscrew on each side of the armrest receiver bracket. See figure 9.
2.Loosen the setscrew.
3.Slide the armrests in or out to the desired width.
4.Tighten the setscrew.
Armrest Angle Adjustment
To change the armrest angle:
1.Lift the armrest straight up so that it is perpendicu- lar to the floor.
2.Loosen the jam nut.
3.Turn the adjustment screw to raise or lower the front of the armrest.
4.Tighten the jam nut to lock the adjustment screw into place.
Armrest Height Adjustment
To change the armrest height:
1.Loosen the setscrew on the armrest. See figure 9.
2.Raise or lower the armrest to the desired height.
3.Tighten the setscrew to secure the armrest.
ARMREST ANGLE | JAM NUT | |
ADJUSTMENT | ||
| ||
SCREW |
|
SEATBACK
RELEASE LEVER
ARMRESTHEIGHT
ADJUSTMENT
SETSCREW
ARMRESTWIDTH
ADJUSTMENT
SETSCREW
Figure 9. Armrest and Seatback Adjustments
Jazzy Sport 2 | www.pridemobility.com | 13 |