I I I . Y O U R P O W E R C H A I R
Electrical Components
The electrical components are located either on or inside the power base. The main circuit breaker is located on the front of the power base. The power module is located under the front cover. See figure 3.
Main Circuit Breaker: The main circuit breaker is a safety feature built into your power chair. When the batteries and the motors are heavily strained (e.g., from excessive loads), the main circuit breaker trips to prevent damage to the motors and the electronics. If the circuit trips, allow your power chair to “rest” for approximately one minute. Next, push in the circuit breaker button, turn on the controller, and continue normal operation. If the main circuit breaker continues to trip repeatedly, contact your authorized Pride Provider.
Power Module: Provides connection between the controller and the motors and batteries.
The GC3 control system supplied with your power chair has been factory set to operate within safe limits for speed, acceleration, deceleration, dynamic stability, and braking. The system is not programmable. Contact your authorized Pride Provider with any questions regarding the operation of your power chair. All components, their connections, and function are identical to the information supplied in the controller basic operating instruction provided with your power chair. See figure 3.
CONTROLLER HARNESS |
BATTERY CONNECTORS |
MOTOR CONNECTORS |
MAIN CIRCUIT BREAKER |
BATTERY CONNECTORS |
Figure 3. Jazzy Sport 2 Electrical Components
Jazzy Sport 2 | www.pridemobility.com | 9 |