I X . S E T - U P , A D J U S T M E N T & U S E
I X . S E T U P , A D J U S T M E N T & U S E
G. ELEVATING LEGREST (OPTIONAL)
1.Installation
To install or remove Elevating Legrest (ELR) see instructions for
2.Adjustment
a)To raise legrest, lift to desired position. Legrest will automatically lock in place.
b)To lower legrest, while seated in chair, first lift slightly then press release lever (F) down and lower legrest to desired position.
H. INTEGRAL JOYSTICK
INSTALLATION
1.To Connect
a.Connect left and right motor to respec- tive motor plug.Align ridges (A).
b.Connect battery plug to battery box. Refer to wire diagram.
2.To Disconnect
Pinch lower edges of plug to release barb mechanism (B). Pull apart.
I.JOYSTICK SWING-AWAY RETRACTABLE MOUNT
(OPTIONAL)
The joystick is mounted with a mechanism which allows the control to be locked in a forward or retracted position using magnets. Adjustment
a.To retract joystick, push outward on the inside of joystick.
b.Push joystick away from front of arm- rest until it locks into retracted position.
c.To return to forward position, push joystick forward until it locks into place.
J.DUAL-POST HEIGHT- ADJUSTABLE ARMRESTS
The
F
A
B
C
B
A
1.Installing Armrest
a.Insert front and rear posts into arm- rest receivers.
b.Engage levers (A and B) to secure armrest.
2.Set-up for Flip-back Operation
a.Disengage lever (A) so front post is able to come free.
b.Armrest now has the ability to be flipped back without removal.
3.Set-up for Removal
a.Disengage levers (A and B) so front and rear posts are able to come free.
b.Armrest can now be easily removed for transferring.
4.Height-Adjustment (option)
a.Release the upper securing lever (C).
b.Set at desired height
c.Return securing lever to locked position.
d.Move armrest up or down to allow
armrest to snap into place
K.HEIGHT-ADJUSTABLE ARMRESTS (OPTIONAL)
1.Installation
a.Slide the outer armpost into the receiver mounted to the wheelchair frame.
b.The armrest will automatically lock into place.
2.Height Adjustment
a.Rotate release lever to second stop.
b.Slide armrest pad up or down to desired height.
c.Return lever to locked position against armpost.
d.Push arm pad until upper armpost locks firmly into place.
3.Removing Armrest
a.Rotate release lever to first stop and remove the armrest.
4.Replacing Armrest
a.Slide armrest back into receiver.
b.Return release lever to locked posi- tion against armpost.
C
|
| 4 |
| 3 |
|
5 |
| 8 |
|
| |
| 10 |
|
2 |
| 7 |
|
| |
| 9 | 6 |
| 1 | |
|
|
Height-Adjustable
Armrest Key
1.Outer armpost
2.Standard receiver
3.Release lever
4.Armrest pad
5.Transfer bar
6.Side panel
7.Outer armpost tension adjustment set screws
8.Inner armpost
9.Receiver adjustment bolts
10.Release Lever
930485 Rev. A | 28 | 29 | 930485 Rev. A |