Quantum 1107 Swing-away Footrests, Elevating Leg Rests Optional, Multi-Axis Foot Plate

	V . C O M F O R T A D J U S T M E N T S
Swing-away Footrests
Swing-away Footrests (SFRs) enable you to rotate the
footrests to the side before you transfer onto or off of		RELEASE LEVER A
your power chair.
		RELEASE LEVER B
To rotate the SFRs:
1.	Push in the release lever. See figure 24.
2.	Rotate the SFRs.	LEG REST
		EXTENSION
To adjust the SFR length:		LEG REST
		ADJUSTMENT
1.	Remove the two adjustment screws from the side of each	SCREWS
	footrestextension.Seefigure24.
2.	Slide the footrest up or down to the desired length.
3.	Reinstallthetwoadjustmentscrews.

Elevating Leg Rests (Optional)

Figure 25. Elevating Leg Rests

Elevating Leg Rests (ELRs) offer an infinite range of ad- justment for the leg angle and a footrest adjustment range of 12–19 in.

To rotate the ELRs:

1.Push in release lever A. See figure 25.

2.Rotate the ELRs.

To adjust the ELR length:

1.Removethetwoadjustmentscrewsfromthesideof eachleg rest extension. See figure 25.

2.Slide the leg rest up or down to the desired length.

3.Reinstallthetwoadjustmentscrews.

To adjust the ELR angle:

1.Push down release lever B. See figure 25.

2.Move the leg rest to the desired angle.

Multi-Axis Foot Plate

The multi-axis foot plate assembly can be installed on either a swing-away footrest or an elevating leg rest. The multi-axis foot plate has four adjustments: leg rest length (A), position (B), tilt (C), and angle (D). See figure 26.

To change leg rest length (A):

1.Remove the hardware.

2.Move the leg rest to the desired position.

3.Reinstall the hardware.

A

B

C

D

A

B

C

D

SETSCREW

Figure 26. Multi-Axis Foot Plate (ELR Shown)

Quantum 1107 www.quantumrehab.com 29