Pride Mobility Mobility Power Chair manual Toggle Operation, Way Toggle

10 Basic Operation Instructions

Toggle Operation

Your Synergy TRU-Balance Power Recline may be equipped with one of three available 4-way toggles, as well as an Attendant Control Module. The actuators can be adjusted either by the user through the toggle, or by an attendant through the Attendant Control Module. Any action made through the Attendant Control Module will override toggle actions.

NOTE: Your TRU-Balance seating system may be equipped with any number of these functions.

4-way Toggle

!Recline Function

1.To recline, push the toggle switch forward.

2.To return to an upright position or a 95° recline position, push the toggle switch forward, release, then push forward again.

!Tilt Function (Optional)

1.To tilt backward, pull the toggle switch backward.

2.To return to a sitting position or to a 0° tilt position, pull the toggle switch backward, release, then pull backward again.

!Seat Elevator Function (Optional)

1.To elevate the seat, push the toggle switch to the left.

2.To lower the seat, push the toggle switch to the left, release, then push to the left again.

Figure 4. 4-way Toggle Operation

!Combined Leg Rest Function (Optional)

1.To elevate both leg rests, push the toggle switch to the right.

2.To lower both leg rests, push the toggle switch to the right, release, then push to the right again.

!Independent Leg Rest Function (Optional)

1.To elevate the left leg rest, push the toggle switch to the left.

2.To lower the left leg rest, push the toggle switch to the left, release, then push to the left again.

3.To elevate the right leg rest, push the toggle switch to the right.

Synergy TRU-Balance Power Recline www.quantumrehab.com