Pride Mobility Mobility Power Chair Operatingthe SYNERGYTRU-BALANCE Power Recline, Inhibit Matrix

Basic Operation Instructions 9

OPERATINGTHE SYNERGYTRU-BALANCE POWER RECLINE

The Synergy TRU-Balance Power Recline can be operated through the PG Remote Plus joystick, a specialty controller, the Attendant Control Module, or a toggle (see figure 4, 5, and 6). There are inhibits on your Synergy Seating System which will not allow you to drive your power chair or operate certain options when reclined or elevated. See figure 2.

WARNING! Check the immediate area before operating the recline features. Keep clear prior to and during movement. Failure to heed can result in personal injury and/or equipment damage.

NOTE: This manual will discuss toggle, joystick, and Attendant Control Module operations only. If your Synergy Seating System is equipped with a different operating device, please refer to the operation manual sup- plied with that device and/or your power chair owner’s manual.

	Recline	Tilt	Elevate		Full Drive
	Lock Out	Lock Out	Lock Out	1/4 Speed	Lock Out
Elevated	x	x		Active
Tilted more than 5°				Active
Tilted more than 20°			x		Active
Reclined more than 20°			x		Active
Tilted/reclined
more than 170°	x	x	x		Active

Figure 2. Inhibit Matrix

The Synergy TRU-Balance Power Recline is at a normal position of 95° and can recline to 168° maximum, in infinite increments. See figure 3.

95 168

Figure 3. Angles of Recline

www.quantumrehab.com Synergy TRU-Balance Power Recline