Basic Operation Instructions | 13 |
Attendant Control Module
Your Synergy TRU-Balance Power Recline is equipped with anAttendant Control Module (see figure 7). The actuators can be adjusted either by the user through the controller or the toggle, or by an attendant through the Attendant Control Module. Any action made through the Attendant Control Module will override toggle actions made by the user. To adjust any of the actuators, press Select to cycle until the actuator to be adjusted is illuminated on the actuator indicator (see figure 8), then press the up arrow to increase the lift or tilt or the down arrow to decrease the lift or tilt.
Actuator Indicator
Power Key 
Figure 7. Attendant Control Module Functions
NOTE: Your TRU-Balance Seating System may be equipped with some or all of these functions.
!Recline Function
1.Press the power key to power on the module.
2.Press Select until the actuator on the back is illuminated on the actuator indicator on the module. Use the up and down arrows to increase or decrease the angle of recline.
3.To return to an upright position or a 95° recline position, press Select until the actuator on the back is illuminated on the actuator indicator on the module, and then press the down arrow until the seatback is in the upright position.
www.quantumrehab.com | Synergy TRU-Balance Power Recline |