V . O P E R A T I O N
Set the speed adjustment dial to your desired speed.
Push or pull the appropriate side of the throttle control lever.
The electromechanical disc park brake automatically disengages and the scooter accelerates smoothly to the speed you preselected with the speed adjustment dial.
Pull on the left handgrip to steer your scooter to the left. Pull on the right handgrip to steer your scooter to the right. Move the tiller to the center position to drive straight ahead.
To stop, slowly release the throttle control lever. The electronic brakes will automatically engage, bringing your scooter to a stop.
NOTE: Your scooter’s reverse speed is slower than that of the forward speed you preset with the speed adjustment dial.
GETTING OFF OF YOUR SCOOTER
1.Bring your scooter to a complete stop.
2.Power down your scooter and remove the key from the key switch.
3.Disengage the seat rotation lever and rotate the seat until you are facing toward the side of your scooter.
4.Make certain that the seat is fixed securely in position.
5.Carefully and safely get out of the seat and stand to the side of your scooter.
6.You can leave the seat facing to the side to facilitate boarding your scooter next time.
POWER DOWN TIMER FEATURE
Your scooter is equipped with an energy saving automatic power down timer feature designed to preserve your scooter’s battery life. If you mistakenly leave the key in the key switch and in the “on” position but do not use your scooter for approximately 20 minutes, the scooter’s controller shuts down automatically. Although the controller is shut down, power will still be supplied to the scooter’s lighting system.
If the power down timer feature takes effect, perform the following steps to resume normal operation:
1.Remove the key from the key switch.
2.Reinsert the key and power up your scooter.
32 | www.pridemobility.com | V10 |