SECTION
SECTION 8—TILLER ADJUSTMENT
Adjusting the Tiller Angle
WARNING
Before performing any maintenance, adjustment or service, turn power Off and remove key from ignition.
Ensure that tiller is properly adjusted before driving the scooter.
After making any tiller angle adjustments and before use, the tiller MUST be securely locked into position. Otherwise, a fall from the scooter could occur causing bodily injury and/or damage to the scooter. Gently, push/pull against tiller to ensure that the tiller is securely engaged into the adjustment plate.
NOTE: For this procedure, refer to FIGURE 8.1.
NOTE: The powered scooters feature an adjustable tiller. The tiller locks into one of three positions. The tiller can also be folded down for transportation and storage.
1.Pull out the tiller adjustment lever (Detail “A”) until the pin disengages from the mounting hole.
2.Move the tiller to the desired position.
3.Release the tiller adjustment lever to lock the pin into the desired mounting hole (Detail “A”).
4.Gently push/pull against tiller to ensure that the tiller is securely locked.
DETAIL “A”
Tiller
Adjustment
Lever
Mounting Hole
Pin
Tiller
Assembly