Invacare FDX-MCG, FDX-CG user manual Securing the Occupant Wheelchair-Anchored Belts

Page 65

7 TRANSPORT READY OPTION (TRRO)

7.4Securing the Occupant Wheelchair-Anchored Belts

￿ WARNING

The pelvic belt that is provided by Invacare has been tested for use in a motor vehicle on this wheelchair only. Do not replace the pelvic belt with a different style pelvic belt.

For this procedure, refer to FIGURE 2 on page 66.

The wheelchair has been provided with a pelvic belt which meets the requirements of ANSI/RESNA WC/19.

The pelvic belt provided by Invacare has been designed to accommodate use on either side of the vehicle. If necessary, follow the instructions below to reverse the orientation of the pelvic belt to accommodate the vehicle-anchored upper torso belt.

1.Install the pelvic belt pin (Detail “A”) into slot in the pelvic belt bracket (Detail “B”). Pull upwards until it snaps into place.

Both ends of the pelvic belt have a pin which is used to secure the vehicle-anchored upper torso belt.

2.Repeat STEP 1 for the opposite pelvic belt bracket.

3.Install the vehicle-anchored upper torso belt onto the pin located at either end of the pelvic belt.

Part No 1163181

65

Invacare® FDX®

Page 64 Page 66
Image 65
Page 64 Page 66
Contents Invacare FDX Contents Label Locations Technical Data Motor LOCKS/WHEEL Locks SETUP/MAINTENANCE Troubleshooting General SymbolsReference Documents Global Limited Warranty Excluding CanadaGeneral Canada Limited Warranty General Guidelines SafetyDriving Operation Information SetupSafety Stairways and Escalators Repair or Service Information Safety/Handling Safety Stability and Balance Do not stand on the frame of the wheelchair Coping with Everyday Obstacles Coping with Everyday ObstaclesReaching, Leaning and Bending Forward Footplates and Front RiggingReaching, Bending Backward Top View Transferring To and From Other SeatsFront View Storage Electrical Batteries Electrical Grounding InstructionsElectrical Charging Batteries Electromagnetic Interference EMI From Radio Wave Sources Weight TrainingWeight Limitation Powered Wheelchair Electromagnetic Interference EMI Safety Label Locations Label located under the front shroud Wheelchairs without TrroWheelchairs with Running Lights Wheelchairs with TrroTypical Product Parameters Models Overall DimensionsWheels SeatWeight Preparing the Joystick for Use Wheelchair OperationMPJ+ Joystick Operating the Wheelchair Turning the Power On/OffSPJ+ Joysticks  For this procedure, refer to on Using the Joystick to Drive the WheelchairRear Wheelchair Front Wheelchair *The mode button is only present on SPJ+ w/ACC joystick Speed Control Buttons On/Off ButtonSpeedometer Joystick Service IndicatorCharger/Programming Input Information Gauge DisplayOn/Off Drive Select Toggle Switch MPJ+ Joystick Switches and IndicatorsLCD Display Screens Speed ControlLCD Display Clock Driving Screen User Settings Set Date and Time Battery Voltage User SettingsIcon Description Remote On/Off Switch Programmable Mono Ports 1 and 2 with External Mode SwitchMemory Card Slot Mode SwitchWhen to Charge Batteries SPJ+, SPJ+ w/PSS and SPJ+ w/ACC Joysticks Display Screen SPJ+, SPJ+ w/PSS and SPJ+ w/ACC JoysticksCharging Batteries Description and Use of Battery Chargers Mini-Display DisplaySingle Function Switch Running Lights Through Single Function SwitchRunning Lights Running Lights Through MPJ+ JoystickDisengaging/Engaging Motor Lock Levers Motor Locks/Wheel LocksDisengaging/Engaging Motor Lock Levers Disengaging/Engaging Wheel Lock Levers Accessories WarningTransport Ready Option Trro About Transport Ready Packages Compliance Information SpecificationsSide View Positioning the Wheelchair in the VehicleSecuring the Wheelchair Securement PointsSecuring the Occupant Wheelchair-Anchored Belts Detail a Pelvic Belt Seating System Vehicle-Anchored BeltsRear View Positioning Belts Positioning Belts Setup/Delivery Inspection Setup/MaintenanceInspect/Adjust Weekly User/Attendant Inspection ChecklistsInspect/Adjust Periodically Inspect/Adjust MonthlySix Month Inspection Service InspectionSETUP/MAINTENANCE Inspect/Adjust Every 18 Months Batteries Using the Proper Batteries For Wheelchairs Using GP34 BatteriesTool QTY Removing/Installing the BatteriesRemoving/Installing the Batteries Removing/Installing the Front BatteryRemoving the Rear Shroud Removing/Installing the Rear BatteryRemove the rear battery from the wheelchair base frame Detail a Disconnecting Battery Cables Replacing the Batteries and/or Battery CablesPerform on one battery at a time Connecting Battery CablesReplacing the Batteries and/or Battery Cables Front BatteryAnti-Tippers Anti-TippersAdjusting Forks Adjusting ForksRepositioning Joystick Repositioning JoystickDisconnecting Disconnecting/Connecting the JoysticksMPJ+ Joysticks Disconnecting/Connecting the Joysticks MPJ+ JoysticksElectrical SPJ+, SPJ+ w/PSS or SPJ+ w/ACC Joysticks Driving PerformanceDisplay Description Definition Service Indicator Light MPJ+, PSR+, PSF+ Joysticks or Displays Symptom Probable Cause SolutionsCtrl not Connected Improperly DON’T Checking Battery Charge LevelInvacare FDX Invacare FDX USA
Top Page Image Contents