Invacare FDX-CG Removing/Installing the Front Battery, Removing/Installing the Batteries

Page 79

Removing/Installing the Front Battery

.

For this procedure, refer to FIGURE 1.

 

Reverse this procedure to install the front battery.

1. Place the wheelchair in a well ventilated area where work can be performed without risking damage to carpeting or floor covering.

2.If necessary, elevate the seat to the up most position.

3.Verify the joystick On/Off switch is in the Off position and disconnect joystick cable (not shown). Refer to Disconnecting/ Connecting the Joysticks on page 89.

4.Remove the two thumb screws securing the front shroud/battery retention bracket to the wheelchair base frame.

5.Remove the front shroud/battery retention bracket from the wheelchair base frame.

6.Disconnect the front battery connector from the front connector of the battery cable.

7.Remove the front battery from the wheelchair base frame.

Front Battery

Connector

8 SETUP/MAINTENANCE

Wheelchair Base Frame

Front Connector of Battery of

Battery Cable Located Here

Front Battery

 

Front Shroud/Battery

Mounting

Retention Bracket

Screws

Part No 1163181

79

Invacare® FDX®

Page 78 Page 80
Image 79
Page 78 Page 80
Contents Invacare FDX Contents Label Locations Technical Data Motor LOCKS/WHEEL Locks SETUP/MAINTENANCE Troubleshooting General SymbolsReference Documents Global Limited Warranty Excluding CanadaGeneral Canada Limited Warranty General Guidelines SafetyDriving Operation Information SetupSafety Stairways and Escalators Repair or Service Information Safety/Handling Safety Stability and Balance Do not stand on the frame of the wheelchair Coping with Everyday Obstacles Coping with Everyday ObstaclesReaching, Leaning and Bending Forward Footplates and Front RiggingReaching, Bending Backward Front View Transferring To and From Other SeatsTop View Storage Electrical Batteries Electrical Grounding InstructionsElectrical Charging Batteries Weight Limitation Weight TrainingElectromagnetic Interference EMI From Radio Wave Sources Powered Wheelchair Electromagnetic Interference EMI Safety Label Locations Label located under the front shroud Wheelchairs without TrroWheelchairs with Running Lights Wheelchairs with TrroTypical Product Parameters Models Overall DimensionsWheels SeatWeight Preparing the Joystick for Use Wheelchair OperationSPJ+ Joysticks Operating the Wheelchair Turning the Power On/OffMPJ+ Joystick  For this procedure, refer to on Using the Joystick to Drive the WheelchairRear Wheelchair Front Wheelchair *The mode button is only present on SPJ+ w/ACC joystick Speedometer On/Off ButtonSpeed Control Buttons Information Gauge Display Service IndicatorJoystick Charger/Programming InputOn/Off Drive Select Toggle Switch MPJ+ Joystick Switches and IndicatorsLCD Display Screens Speed ControlLCD Display Clock Driving Screen User Settings Set Date and Time Battery Voltage User SettingsIcon Description Remote On/Off Switch Programmable Mono Ports 1 and 2 with External Mode SwitchWhen to Charge Batteries Mode SwitchMemory Card Slot SPJ+, SPJ+ w/PSS and SPJ+ w/ACC Joysticks Display Screen SPJ+, SPJ+ w/PSS and SPJ+ w/ACC JoysticksCharging Batteries Description and Use of Battery Chargers Mini-Display DisplayRunning Lights Through MPJ+ Joystick Running Lights Through Single Function SwitchSingle Function Switch Running LightsDisengaging/Engaging Motor Lock Levers Motor Locks/Wheel LocksDisengaging/Engaging Motor Lock Levers Disengaging/Engaging Wheel Lock Levers Accessories WarningTransport Ready Option Trro About Transport Ready Packages Compliance Information SpecificationsSide View Positioning the Wheelchair in the VehicleSecuring the Wheelchair Securement PointsSecuring the Occupant Wheelchair-Anchored Belts Detail a Pelvic Belt Rear View Vehicle-Anchored BeltsSeating System Positioning Belts Positioning Belts Setup/Delivery Inspection Setup/MaintenanceInspect/Adjust Weekly User/Attendant Inspection ChecklistsInspect/Adjust Periodically Inspect/Adjust MonthlySix Month Inspection Service InspectionSETUP/MAINTENANCE Inspect/Adjust Every 18 Months Batteries Using the Proper Batteries For Wheelchairs Using GP34 BatteriesTool QTY Removing/Installing the BatteriesRemoving/Installing the Batteries Removing/Installing the Front BatteryRemoving the Rear Shroud Removing/Installing the Rear BatteryRemove the rear battery from the wheelchair base frame Detail a Disconnecting Battery Cables Replacing the Batteries and/or Battery CablesPerform on one battery at a time Connecting Battery CablesReplacing the Batteries and/or Battery Cables Front BatteryAnti-Tippers Anti-TippersAdjusting Forks Adjusting ForksRepositioning Joystick Repositioning JoystickDisconnecting Disconnecting/Connecting the JoysticksMPJ+ Joysticks Disconnecting/Connecting the Joysticks MPJ+ JoysticksElectrical SPJ+, SPJ+ w/PSS or SPJ+ w/ACC Joysticks Driving PerformanceDisplay Description Definition Service Indicator Light MPJ+, PSR+, PSF+ Joysticks or Displays Symptom Probable Cause SolutionsCtrl not Connected Improperly DON’T Checking Battery Charge LevelInvacare FDX Invacare FDX USA
Top Page Image Contents