Invacare FDX-MCG, FDX-CG user manual Positioning Belts, Side View

Page 68

7TRANSPORT READY OPTION (TRRO)

Positioning Belts

￿ WARNING

The angle of the pelvic belt should be within the preferred zone of 45 to 75 degrees to the horizontal OR within the optional zone of 30 to 45 degrees to the horizontal.

Steeper side-view pelvic belt angles are especially important if the pelvic belt is intended to be used for postural support in addition to occupant restraint in a frontal crash. Steeper angles will reduce the tendency for a vertical gap to develop between the user and the belt due to compliance of seat cushions and belt movement, thereby reducing the tendency for the user to slip under the belt and for the belt to ride up on the soft abdomen during normal use

Steeper belt angles also reduce the tendency for upper-torso belts to pull the pelvic belt onto the abdomen during frontal impact loading.

For this procedure, refer to FIGURE 4 on page 69.

Preferred Zone Optional Zone

Side View

45°30° 75°

Invacare® FDX®

68

Part No 1163181

Image 68
Contents Invacare FDX Contents Label Locations Technical Data Motor LOCKS/WHEEL Locks SETUP/MAINTENANCE Troubleshooting Symbols GeneralGlobal Limited Warranty Excluding Canada Reference DocumentsGeneral Canada Limited Warranty Safety General GuidelinesOperation Information Setup DrivingSafety Stairways and Escalators Repair or Service Information Safety/Handling Safety Stability and Balance Do not stand on the frame of the wheelchair Coping with Everyday Obstacles Coping with Everyday ObstaclesFootplates and Front Rigging Reaching, Leaning and Bending ForwardReaching, Bending Backward Top View Transferring To and From Other SeatsFront View Storage Electrical Grounding Instructions Electrical BatteriesElectrical Charging Batteries Electromagnetic Interference EMI From Radio Wave Sources Weight TrainingWeight Limitation Powered Wheelchair Electromagnetic Interference EMI Safety Label Locations Wheelchairs without Trro Label located under the front shroudWheelchairs with Trro Wheelchairs with Running LightsOverall Dimensions Typical Product Parameters ModelsSeat WheelsWeight Wheelchair Operation Preparing the Joystick for UseMPJ+ Joystick Operating the Wheelchair Turning the Power On/OffSPJ+ Joysticks Using the Joystick to Drive the Wheelchair  For this procedure, refer to onFront Wheelchair Rear Wheelchair *The mode button is only present on SPJ+ w/ACC joystick Speed Control Buttons On/Off ButtonSpeedometer Service Indicator JoystickCharger/Programming Input Information Gauge DisplayMPJ+ Joystick Switches and Indicators On/Off Drive Select Toggle SwitchSpeed Control LCD Display ScreensLCD Display Clock Driving Screen User Settings User Settings Set Date and Time Battery VoltageIcon Description Programmable Mono Ports 1 and 2 with External Mode Switch Remote On/Off SwitchMemory Card Slot Mode SwitchWhen to Charge Batteries SPJ+, SPJ+ w/PSS and SPJ+ w/ACC Joysticks SPJ+, SPJ+ w/PSS and SPJ+ w/ACC Joysticks Display ScreenCharging Batteries Description and Use of Battery Chargers Display Mini-DisplayRunning Lights Through Single Function Switch Single Function SwitchRunning Lights Running Lights Through MPJ+ JoystickMotor Locks/Wheel Locks Disengaging/Engaging Motor Lock LeversDisengaging/Engaging Motor Lock Levers Accessories Warning Disengaging/Engaging Wheel Lock LeversTransport Ready Option Trro About Transport Ready Packages Specifications Compliance InformationPositioning the Wheelchair in the Vehicle Side ViewSecurement Points Securing the WheelchairSecuring the Occupant Wheelchair-Anchored Belts Detail a Pelvic Belt Seating System Vehicle-Anchored BeltsRear View Positioning Belts Positioning Belts Setup/Maintenance Setup/Delivery InspectionUser/Attendant Inspection Checklists Inspect/Adjust WeeklyInspect/Adjust Monthly Inspect/Adjust PeriodicallyService Inspection Six Month InspectionSETUP/MAINTENANCE Inspect/Adjust Every 18 Months Batteries For Wheelchairs Using GP34 Batteries Using the Proper BatteriesRemoving/Installing the Batteries Tool QTYRemoving/Installing the Front Battery Removing/Installing the BatteriesRemoving/Installing the Rear Battery Removing the Rear ShroudRemove the rear battery from the wheelchair base frame Detail a Replacing the Batteries and/or Battery Cables Disconnecting Battery CablesConnecting Battery Cables Perform on one battery at a timeFront Battery Replacing the Batteries and/or Battery CablesAnti-Tippers Anti-TippersAdjusting Forks Adjusting ForksRepositioning Joystick Repositioning JoystickDisconnecting/Connecting the Joysticks DisconnectingDisconnecting/Connecting the Joysticks MPJ+ Joysticks MPJ+ JoysticksDriving Performance Electrical SPJ+, SPJ+ w/PSS or SPJ+ w/ACC JoysticksDisplay Description Definition Service Indicator Light Symptom Probable Cause Solutions MPJ+, PSR+, PSF+ Joysticks or DisplaysCtrl not Connected Improperly Checking Battery Charge Level DON’TInvacare FDX Invacare FDX USA