Invacare 6263 Installing Rear LEG Extension Options Figure, Front Rear, Swivel Wheel Attachment

Page 3

3.Repeat STEP 2 for remaining FRONT leg.

4.Adjust the wheel attachment/leg extension to one (1) of the adjustment holes.

5.Perform one (1) of the following:

A.Install the REAR leg extension options, if necessary. Refer to INSTALLING REAR LEG EXTENSION OPTIONS in this instruction sheet.

B.Remove rear rubber tips and replace with glide tips included. Refer to INSTALLING THE GLIDE TIP in this instruction sheet.

NOTE: When using 10-inch REAR leg extensions, the adjustment ranges are reduced on Model Nos. 6273 and 6267.

6.Ensure that the snap button of each leg fully protrudes through the desired adjustment hole and legs are adjusted so the walker is level.

MODEL NOS. 6270 AND 6271

MODEL NOS. 6273 AND 6267

FRONT REAR

Walker Frame

SWIVEL WHEEL ATTACHMENT

Snap Button

 

Leg Tube

MODEL NO. 6275

Adjustment

Locknut

Holes

Wheel

 

Bushing

LEG

Hex Screw

EXTENSION

Washers

 

FIXED WHEEL ATTACHMENT

 

FIGURE 1 - INSTALLING WHEEL ATTACHMENTS/LEG EXTENSIONS

INSTALLING REAR LEG EXTENSION OPTIONS (FIGURE 2)

NOTE: Refer to INSTALLATION WARNINGS in the SAFETY SUMMARY of this instruction sheet.

1.Depress the snap buttons to remove the two (2) EXISTING REAR leg extensions from the walker.

NOTE: The REAR leg extensions will not be reassembled to the walker when using the REAR wheel attachments.

2.Depress the snap button on the walker frame and install the NEW wheel attachment/leg extension onto REAR leg of the walker.

3.Repeat STEP 2 for remaining REAR leg.

4.Adjust the wheel attachment/leg extension to one (1) of the adjustment holes.

Part No. 1089633

3

LEG EXTENSIONS AND

 

 

WHEELED WALKER ACCESSORIES

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 6266 Safety SummaryGeneral Warning 6264Installing Wheel ATTACHMENTS/LEG Extensions Figure Installation WarningsStability Warnings Installing Rear LEG Extension Options Figure Front RearSwivel Wheel Attachment Installing the Glide TIP Figure Model NOSDetail a Swivel Casters Model NOS and 6267 Figure Replacing Fixed WHEELS/SWIVEL CastersTightening Swivel Casters Figure Fixed Wheels Model NOS and 6271 FigureLimited Warranty Conservez CES Instructions Résumé DES Consignes DE Sécurité Avertissements Généraux6266 6274 Avertissements Pour LA Stabilité Avertissements Pour LinstallationInstaller LES Attaches DE ROUE/RALLONGES DE Pattes Figure Avant ArrièreAttache DE Roue Fixe Rallonge DE Patte Installer LES Options DES Rallonges DE Pattes Arrière Installer LES Options DES Rallonges DE Pattes Arrière FigureRoues Fixes Modèles NOS ET 6271 Figure Installer LE Patin FigureRemplacer LES Roues FIXES/ROULETTES Pivotantes Schéma aRoulettes Pivotantes Modèles NOS ET 6267 Figure Serrer LES Roulettes Pivotantes FigureGarantie Limitée 6263 Garde Estas InstuccionesSumario DE Advertencias Advertencias GeneralesAdvertencia Sobre LA Instalacion Advertencia Sobre LA EstabilidadAccesorio DE Rueda Fija Accesorio DE Rueda Giratoria Modelo noExtension DE Pata Instalando Extensiones DE Patas Traseras Opcionales Figura Instalando LA Punta Deslisable FiguraModelos NOS Reemplazando LAS Ruedas Fijas Y Ruedas Giratorias Detalle aRuedas Fijas Modelos NOS Y 6271 Figura Ruedas Giratorias Modelos NOS Y 6267 Figura Apretando LAS Ruedas Giratorias FiguraCanada Garantia

6263, 6265, 6266, 6274, 6264 specifications

The Invacare 6264, 6274, 6266, 6265, and 6263 are a series of advanced pressure relief cushions designed for individuals who require enhanced comfort and support in their seating arrangements. These cushions are particularly beneficial for those at risk of developing pressure ulcers or experiencing discomfort due to prolonged periods of sitting.

The primary feature of these Invacare models is their ergonomic design, which promotes optimal positioning and weight distribution. This helps to minimize pressure points, reducing the risk of skin breakdown. Incorporating a unique multi-layer construction, these cushions consist of different materials that work in synergy to deliver superior pressure relief. The top layer often features a soft, breathable fabric that enhances comfort while allowing for air circulation, keeping the user cool and dry.

Another notable characteristic of the Invacare cushions is their use of specialized foam technology. The innovative foam formulations adjust to the body’s contours, providing personalized support that caters to individual user needs. Some models come with additional gel or air-filled components that further enhance pressure relief by conforming to the user’s shape and reducing shear forces.

Stability is essential in any seating solution, and the Invacare cushions are no exception. Each model incorporates a stable base that provides robust support during transfers and movement. This stability is complemented by non-slip bottom surfaces, ensuring that the cushion remains securely in place during use.

Furthermore, the Invacare series places a strong emphasis on ease of care. The removable, washable covers make maintenance straightforward, allowing caregivers and users to keep the cushions clean and hygienic. Additionally, many of these models are available in various sizes to accommodate different seating environments, from wheelchairs to standard chairs.

Whether used in home care, long-term facilities, or hospitals, the Invacare 6264, 6274, 6266, 6265, and 6263 cushions stand out for their commitment to user comfort and safety. With a combination of advanced design, innovative materials, and practical features, they offer effective solutions for pressure management while enhancing overall user quality of life.
Top Page Image Contents