Invacare 6274, 6266, 6264, 6265, 6263 Installing the Glide TIP Figure, Model NOS, Detail a

Page 4

5.Repeat STEP 4 for remaining wheel attachment/leg extension.

6.Ensure that the snap button of each leg fully protrudes through the desired adjustment hole and legs are adjusted so the walker sits level.

MODEL NOS.

6264 AND 6265

Adjustment Brake

Holeswith

Wheel

MODEL NOS.

6263 AND 6274

Adjustment

Holes

Sure

Glide

MODEL NO. 6266

Adjustment

Holes

FIGURE 2 - INSTALLING REAR LEG EXTENSION OPTIONS

INSTALLING THE GLIDE TIP (FIGURE 3)

NOTE: Refer to INSTALLATION WARNINGS in the SAFETY SUMMARY of this instruction sheet.

1.Depress the snap buttons on the walker frame to remove the rear leg extension from the walker.

2.Firmly grasp the leg extension and perform one of the following:

A.Remove the EXISTING glide tip from the leg extension.

B.Remove the rubber tip from the leg extension.

NOTE: When properly installed, the tube edge will rest inside the top edge of the new glide tip. If the tube edge is visible, the tip is not properly installed.

3.Insert the NEW glide tip firmly into the leg extension.

4.Ensure the NEW glide tip is properly installed as shown in DETAIL "A" of FIGURE 3. If necessary, tap new glide tip into position.

5.Depress the snap button and install the leg extension with NEW glide tip onto the walker frame leg. Ensure that the snap button of each leg fully protrudes through the desired adjustment hole and legs are adjusted so the walker sits level.

6.Repeat STEPS 1-5 on remaining rear leg extension.

Snap

ButtonWalker

Frame Leg

Leg Tube

Glide Tip

DETAIL "A"

Glide Tip

Glide Tip

Properly

Improperly

Installed

Installed

 

FIGURE 3 - INSTALLING

THE GLIDE TIP

LEG EXTENSIONS AND

4

Part No. 1089633

WHEELED WALKER ACCESSORIES

 

 

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Safety Summary General Warning6264 6266Installation Warnings Installing Wheel ATTACHMENTS/LEG Extensions FigureStability Warnings Front Rear Installing Rear LEG Extension Options FigureSwivel Wheel Attachment Model NOS Installing the Glide TIP FigureDetail a Replacing Fixed WHEELS/SWIVEL Casters Tightening Swivel Casters FigureFixed Wheels Model NOS and 6271 Figure Swivel Casters Model NOS and 6267 FigureLimited Warranty Avertissements Généraux Conservez CES Instructions Résumé DES Consignes DE Sécurité6266 6274 Avertissements Pour Linstallation Avertissements Pour LA StabilitéAvant Arrière Installer LES Attaches DE ROUE/RALLONGES DE Pattes FigureAttache DE Roue Fixe Rallonge DE Patte Installer LES Options DES Rallonges DE Pattes Arrière Figure Installer LES Options DES Rallonges DE Pattes ArrièreInstaller LE Patin Figure Remplacer LES Roues FIXES/ROULETTES PivotantesSchéma a Roues Fixes Modèles NOS ET 6271 FigureSerrer LES Roulettes Pivotantes Figure Roulettes Pivotantes Modèles NOS ET 6267 FigureGarantie Limitée Garde Estas Instucciones Sumario DE AdvertenciasAdvertencias Generales 6263Advertencia Sobre LA Estabilidad Advertencia Sobre LA InstalacionAccesorio DE Rueda Giratoria Modelo no Accesorio DE Rueda FijaExtension DE Pata Instalando LA Punta Deslisable Figura Instalando Extensiones DE Patas Traseras Opcionales FiguraModelos NOS Detalle a Reemplazando LAS Ruedas Fijas Y Ruedas GiratoriasRuedas Fijas Modelos NOS Y 6271 Figura Apretando LAS Ruedas Giratorias Figura Ruedas Giratorias Modelos NOS Y 6267 FiguraGarantia Canada

6263, 6265, 6266, 6274, 6264 specifications

The Invacare 6264, 6274, 6266, 6265, and 6263 are a series of advanced pressure relief cushions designed for individuals who require enhanced comfort and support in their seating arrangements. These cushions are particularly beneficial for those at risk of developing pressure ulcers or experiencing discomfort due to prolonged periods of sitting.

The primary feature of these Invacare models is their ergonomic design, which promotes optimal positioning and weight distribution. This helps to minimize pressure points, reducing the risk of skin breakdown. Incorporating a unique multi-layer construction, these cushions consist of different materials that work in synergy to deliver superior pressure relief. The top layer often features a soft, breathable fabric that enhances comfort while allowing for air circulation, keeping the user cool and dry.

Another notable characteristic of the Invacare cushions is their use of specialized foam technology. The innovative foam formulations adjust to the body’s contours, providing personalized support that caters to individual user needs. Some models come with additional gel or air-filled components that further enhance pressure relief by conforming to the user’s shape and reducing shear forces.

Stability is essential in any seating solution, and the Invacare cushions are no exception. Each model incorporates a stable base that provides robust support during transfers and movement. This stability is complemented by non-slip bottom surfaces, ensuring that the cushion remains securely in place during use.

Furthermore, the Invacare series places a strong emphasis on ease of care. The removable, washable covers make maintenance straightforward, allowing caregivers and users to keep the cushions clean and hygienic. Additionally, many of these models are available in various sizes to accommodate different seating environments, from wheelchairs to standard chairs.

Whether used in home care, long-term facilities, or hospitals, the Invacare 6264, 6274, 6266, 6265, and 6263 cushions stand out for their commitment to user comfort and safety. With a combination of advanced design, innovative materials, and practical features, they offer effective solutions for pressure management while enhancing overall user quality of life.
Top Page Image Contents