Invacare 6266, 6264, 6265 Replacing Fixed WHEELS/SWIVEL Casters, Tightening Swivel Casters Figure

Page 5

REPLACING FIXED WHEELS/SWIVEL CASTERS

NOTE: Refer to the INSTALLATION WARNINGS in the SAFETY SUMMARY of this instruction sheet.

FIXED WHEELS - MODEL NOS. 6270 AND 6271 (FIGURE 1)

Tools Required:

7/16-inch Boxed End Wrench (QTY. 2)

1.Position one (1) wrench on the hex screw and remove the locknut by using the other wrench and turning COUNTERCLOCKWISE.

2.Remove the washers, wheel, bushing and hex screw that secure the wheel to the leg extension.

3.Inspect washers, bushing and hex screw for wear and/or damage and replace if necessary.

4.To install new wheel, reverse STEPS 1-2.

SWIVEL CASTERS - MODEL NOS. 6273 AND 6267 (FIGURE 4)

Tools Required:

10-inch crescent wrench

1.Grip leg tube and using the crescent wrench, apply to hex nut.

2.Loosen swivel caster and unscrew from swivel caster housing.

3.Inspect swivel caster housing and leg tube for any damage. If damaged, replace immediately.

4.Insert new swivel caster by screwing it into swivel caster housing and tightening with the crescent wrench.

TIGHTENING SWIVEL CASTERS (FIGURE 4)

NOTE: Refer to the INSTALLATION WARNINGS in the SAFETY SUMMARY of this instruction sheet.

1.Remove swivel wheel attachments from front legs by depressing snap button.

2.Hold one (1) swivel wheel attachment with the wheel up as shown in FIGURE 4.

3.Turn hex nut CLOCKWISE with a wrench to tighten swivel caster.

4.Repeat STEPS 2-3 for remaining swivel wheel attachment.

5.Depress the snap buttons and slide the swivel wheel attachments onto the front legs of the walker. Ensure that the snap button of each leg fully protrudes through the desired adjustment hole and legs are adjusted so the walker sits level.

 

 

Wheel

 

Hex Nut

Swivel Caster Housing

 

 

 

Leg Tube

 

 

FIGURE 4 - TIGHTENING SWIVEL CASTERS

Part No. 1089633

5

LEG EXTENSIONS AND

 

 

WHEELED WALKER ACCESSORIES

Page 4 Page 6
Image 5
Page 4 Page 6
Contents General Warning Safety Summary6264 6266Stability Warnings Installing Wheel ATTACHMENTS/LEG Extensions FigureInstallation Warnings Swivel Wheel Attachment Installing Rear LEG Extension Options FigureFront Rear Detail a Installing the Glide TIP FigureModel NOS Tightening Swivel Casters Figure Replacing Fixed WHEELS/SWIVEL CastersFixed Wheels Model NOS and 6271 Figure Swivel Casters Model NOS and 6267 FigureLimited Warranty 6266 6274 Conservez CES Instructions Résumé DES Consignes DE SécuritéAvertissements Généraux Avertissements Pour LA Stabilité Avertissements Pour LinstallationAttache DE Roue Fixe Rallonge DE Patte Installer LES Attaches DE ROUE/RALLONGES DE Pattes FigureAvant Arrière Installer LES Options DES Rallonges DE Pattes Arrière Installer LES Options DES Rallonges DE Pattes Arrière FigureRemplacer LES Roues FIXES/ROULETTES Pivotantes Installer LE Patin FigureSchéma a Roues Fixes Modèles NOS ET 6271 FigureRoulettes Pivotantes Modèles NOS ET 6267 Figure Serrer LES Roulettes Pivotantes FigureGarantie Limitée Sumario DE Advertencias Garde Estas InstuccionesAdvertencias Generales 6263Advertencia Sobre LA Instalacion Advertencia Sobre LA EstabilidadExtension DE Pata Accesorio DE Rueda FijaAccesorio DE Rueda Giratoria Modelo no Modelos NOS Instalando Extensiones DE Patas Traseras Opcionales FiguraInstalando LA Punta Deslisable Figura Ruedas Fijas Modelos NOS Y 6271 Figura Reemplazando LAS Ruedas Fijas Y Ruedas GiratoriasDetalle a Ruedas Giratorias Modelos NOS Y 6267 Figura Apretando LAS Ruedas Giratorias FiguraCanada Garantia

6263, 6265, 6266, 6274, 6264 specifications

The Invacare 6264, 6274, 6266, 6265, and 6263 are a series of advanced pressure relief cushions designed for individuals who require enhanced comfort and support in their seating arrangements. These cushions are particularly beneficial for those at risk of developing pressure ulcers or experiencing discomfort due to prolonged periods of sitting.

The primary feature of these Invacare models is their ergonomic design, which promotes optimal positioning and weight distribution. This helps to minimize pressure points, reducing the risk of skin breakdown. Incorporating a unique multi-layer construction, these cushions consist of different materials that work in synergy to deliver superior pressure relief. The top layer often features a soft, breathable fabric that enhances comfort while allowing for air circulation, keeping the user cool and dry.

Another notable characteristic of the Invacare cushions is their use of specialized foam technology. The innovative foam formulations adjust to the body’s contours, providing personalized support that caters to individual user needs. Some models come with additional gel or air-filled components that further enhance pressure relief by conforming to the user’s shape and reducing shear forces.

Stability is essential in any seating solution, and the Invacare cushions are no exception. Each model incorporates a stable base that provides robust support during transfers and movement. This stability is complemented by non-slip bottom surfaces, ensuring that the cushion remains securely in place during use.

Furthermore, the Invacare series places a strong emphasis on ease of care. The removable, washable covers make maintenance straightforward, allowing caregivers and users to keep the cushions clean and hygienic. Additionally, many of these models are available in various sizes to accommodate different seating environments, from wheelchairs to standard chairs.

Whether used in home care, long-term facilities, or hospitals, the Invacare 6264, 6274, 6266, 6265, and 6263 cushions stand out for their commitment to user comfort and safety. With a combination of advanced design, innovative materials, and practical features, they offer effective solutions for pressure management while enhancing overall user quality of life.
Top Page Image Contents