SAFETY SUMMARY (continued)
FOLDING/ASSEMBLY WARNINGS
Afterunfoldingorassemblingwalker,ensurethatwalkerissecurelylocked in OPEN position and level to the ground BEFORE using.
DO NOT hang anything on either the left or right side frames or the left and right handle bars. This will cause side frames or handle bars to bend downward and prevent walker from locking into place when fully opened. This may also cause walker to tip, resulting in injury or damage.
INSTALLATION WARNINGS
Ensure ALL handle snap buttons fully protrude through adjustment holes of each front frame tube. This ensures that the handles are securely locked in position.
The handles should be adjusted so the walker is level.
Always test to see that the walker and attachments are properly and securely locked in place BEFORE using.
OPENING/FOLDING THE WALKER (FIGURE 1)
NOTE: Refer to INSTALLATION WARNINGS in the SAFETY SUMMARY in this instruction sheet.
1.Press the release button to unlock the lock bar.
2.Grasping the lock bar, pull until the walker is fully unfolded and an audible "click" is heard.
3.If necessary, unfold the handles by performing the following:
A.Grasp the handle and pull towards side of the walker frame.
B.Ensurebothsnapbuttonsfullyprotrudethroughbothheightadjustmentholes.
C.Repeat STEPS
4.Ensure both handles are even and at the correct height. Refer to ADJUST- ING THE HANDLE BARS in this instruction sheet.
5.Reverse STEPS
4