Left Rear Frame Tube Right Rear Left Front Locknut

1.Remove the four (4) mounting screws, washers and locknuts that secure the four (4) wheel inserts to the walker frame. Remove the four (4) wheel inserts.

2.Install the right two-way wheel insert into the right rear frame tube. Secure with mounting screw, washer, and locknut.

3.Install the left two-way wheel insert into the left rear frame tube. Secure with mounting screw, washer, and locknut.

4.Install the right one-way wheel insert into the left front frame tube. Secure with mounting screw, washer and locknut.

5.Install the left one-way wheel insert into the right front frame tube. Secure with mounting screw, washer and locknut.

Left Rear
Frame Tube
Right Rear		Left Front
Right Rear		Frame Tube
Frame Tube		Frame Tube
Frame Tube
Locknut		Walker	Left Two-Way
		Walker	Wheel Insert
		Frame	Wheel Insert
Washers		Frame
Washers
Mounting	Left One-
Screw	Left One-
	Way Wheel
	Insert	Right Front
NOTE: Reverse Postural		Frame Tube
(Pulling) Walker Shown.	Right One-Way		Right Two-Way
	Right One-Way		Right Two-Way
	Wheel Insert		Wheel Insert

FIGURE 4 - CONVERTING THE REVERSE POSTURAL (PULLING) WALKER

TO A FORWARD (PUSHING) WALKER