Rear Left
Frame Tube
Wheel Insert
Crutch Tip
FIGURE 6 - INSTALLING THE CRUTCH TIPS
REPLACING THE GRIPS (FIGURE 7)
NOTE: Refer to INSTALLATION WARNINGS in the SAFETY SUMMARY in this instruction sheet.
1.Remove the EXISTING grip and end plug. Discard both.
2.Apply a thin coat of hair spray on the inside of the NEW grip and on to the handle.
NOTE: This application will make it easier to slide the grip onto the push handle bar.
3.Slide NEW grip onto one end of the push handle.
4.Install NEW end plug.
| Grip |
Handle Bars | End Plug |
| |
FIGURE 7 - REPLACING THE GRIPS | |
10