REPLACING THE WALKER PAD (FIGURE 5)
NOTE: Refer to INSTALLATION WARNINGS in the SAFETY SUMMARY in this instruction sheet.
1.Separate the hook and loop strips and remove the pad cover.
2.Remove the EXISTING walker pad crossmember.
3.Slide the NEW walker pad over the crossmember.
4.Reinstall the pad cover and secure with hook and loop strips.
Pad Cover | Hook and Loop Strips |
| |
| Walker Pad |
Crossmember |
|
FIGURE 5 - REPLACING THE WALKER PAD
INSTALLING THE CRUTCH TIPS (FIGURE 6)
NOTE: Refer to INSTALLATION WARNINGS in the SAFETY SUMMARY in this instruction sheet.
NOTE: Rear wheels are determined from the users position.
1.Remove the rea r wheel. Refer to REPLACING THE WHEEL in this instruc- tion sheet.
2.Slide crutch tip on to the wheel insert in the rear frame tube.
3.Repeat STEPS
9