Loosen the cable brake adjuster unit locknut

Adjusting Cable Adjuster Unit - Wheel

Assembly - MODEL 65400 ONLY

(FIGURE 8)

Adjusting Cable Adjuster Unit - Wheel Assembly - MODEL 65420 ONLY (FIGURE 9)

NOTE: Adjusting the cable adjuster unit will increase/ decrease the cable brake pressure on the wheels.

NOTE: COUNTERCLOCKWISE/CLOCKWISE di- rections are determined by standing behind the rollator (users position).

1.	Loosen the cable brake adjuster unit locknut.
2.	Do one (1) of the following:
	A.	To increase tension, turn the cable adjuster unit
		COUNTERCLOCKWISE.
	B.	To decrease tension, turn the cable adjuster unit
		CLOCKWISE.
3.	Retighten the cable adjuster unit locknut.
4.	Test the brake. If the tension of the brake handle is
	STILL too loose/tight, perform the following:
	A.	Repeat STEP 1.

NOTE: Adjusting the cable adjuster unit will increase/ decrease the cable brake pressure on the wheels.

NOTE: COUNTERCLOCKWISE/CLOCKWISE di- rections are determined by standing behind the rollator (users position).

1.Loosen the cable brake adjuster unit locknut.

2.Do one (1) of the following:

A.To increase tension, turn the cable adjuster unit

COUNTERCLOCKWISE.

B.To decrease tension, turn the cable adjuster unit

3.Retighten the cable adjuster unit locknut.

4.Test the brake. If the tension of the brake handle is STILL too loose/tight, repeat STEPS 1-3.

B.	Loosen the phillips screw on the brake clamp.
C.	Pullthebrakewirefurtherthroughthebrakeclamp.

NOTE: There will be additional excess wire. It may be necessary to fold wire up to keep wire from interfering

Cable

Brake Handle

Cable Adjuster

Unit Locknut

with brake action.

Cable Adjuster Unit

Brake Cable

Cable Adjuster

Unit Locknut

Brake

Clamp

Phillips Screw

Cable Adjuster Unit

Top of Rear Leg