Safety Summary

Reliant Bath Lift (RBL250)

Pendant/Cable/Current Limit Device Replacement Kit

Assembly, Installation and Operating Instructions

Kit No. 1085144

NOTE: Check all parts for shipping damage. In case of dam- age,DONOTuse.ContactyourDealerforfurtherinstruction.

The following recommendations are made for the safe replacement of the PENDANT/CABLE/CUR-

RENT LIMIT DEVICE:

GENERAL WARNINGS

DO NOT install or use this equipment without first reading and understanding this instruc- tion sheet. If you are unable to understand the Warnings, Cautions or Instructions in this Instruction Sheet and in the Owner's Operat- ing and Maintenance Manual (Part No. 1081003) provided with the Bath Lift, contact a healthcare professional, dealer or techni- cal personnel before attempting to install this kit, otherwise, injury or damage may occur.

This kit MUST be installed by an Invacare Dealer or technical personnel.

INSTALLATION WARNINGS

After ANY adjustments, repair or service and BEFORE use, make sure all attaching hard- ware is tightened securely - otherwise injury or damage may occur.

Use proper lifting techniques to avoid in- jury. Keep back straight and bend knees when lifting components of the bath lift.

REPLACING THE PENDANT/CABLE/ CURRENT LIMIT DEVICE

NOTE: Refer to the INSTALLATION WARNINGS in the SAFETY SUMMARY of this instruction sheet.

Removing the Seat (FIGURE 1)

1.Secure the frame to the floor with the suction cups or by standing on the frame base during removal of the seat.

2.Press the UP button on the pendant to raise the seat all the way up (DETAIL "A").

3.Grasp the handgrip on the battery pack and pull upwards to remove it from the motor shroud as shown in DETAIL "B".

4.Press and hold the spring loaded chair release button to release the seat (DETAIL "C").

5.While holding the button with one hand, grasp the seat bottom firmly with your other hand.

6.Slide the seat up until the slide block disengages from the groove in the frame as shown in FIGURE 1.

7.Grasp the handgrip on the battery pack and push downwards to install onto the motor shroud.

8.Press the DOWN button on the pendant to lower the bath lift to the lowest position (DETAIL "A").

9.If necessary, remove the bath lift frame from the bathtub. Refer to REMOVING THE FRAME FROM THE BATHTUB in this instruction sheet.

DETAIL "A"			DETAIL "B"
STEPS 1 AND 8		STEPS 2 AND 7
		PULL UP TO REMOVE
Down Button		é PUSH DOWN TO
	Pendant		êINSTALLHandgrip



				Motor
Up				Shroud
Button				Battery Pack

WARNING

To prevent pinching injury between seat back and motor shroud when removing/ installing the seat, DO NOT grasp seat any- where other than at the recess at the top (DETAIL "C"), the opening at the bottom of the seat or the lip at the top of the seat.

To prevent frame from tipping when remov- ing seat, either suction the frame to the floor or place one foot on the frame base when removing/installing the seat.

CAUTION

The bath lift seat MUST be removed from the top of the lifting cycle, otherwise, damage to the unit may occur.

DO NOT grasp seat by side flaps, otherwise damage to the bath lift or the bathtub may occur.

	DETAIL "C"	Seat
	DETAIL "C"	Recess
	STEP 4	Recess

Spring Loaded Chair Release Button

LIFT THE SEAT

STEPS 5-6

Slide

Block

Seat Bottom Groove Frame

FIGURE 1 - REMOVING THE SEAT

1085144 specifications

Invacare 1085144 is a standout product in the realm of mobility aids, designed to enhance the quality of life for users requiring assistance in mobility. This innovative device is engineered with a blend of practicality, comfort, and durability, making it an ideal choice for individuals with limited mobility due to age, injury, or disability.

One of the main features of the Invacare 1085144 is its lightweight aluminum frame, which not only contributes to the overall ease of use but also ensures exceptional strength and stability. The device can support a significant amount of weight, accommodating a diverse range of users. The design is also easy to maneuver, allowing for smooth navigation in various environments, whether indoors or outdoors.

The mobility aid incorporates ergonomic handles that provide a secure grip, reducing the risk of slippage and enhancing user confidence while moving. Additionally, the handles are adjustable, allowing users to customize the height to their specific preferences for maximum comfort. This flexibility is crucial for ensuring that users can maintain proper posture while using the device.

Another notable characteristic of the Invacare 1085144 is its innovative wheel design. The large, durable wheels are equipped with a tread pattern engineered for superior traction, allowing the device to traverse different terrains without difficulty. This feature is particularly beneficial for users who enjoy outdoor activities or require mobility solutions that can handle uneven surfaces.

The Invacare 1085144 also emphasizes user comfort through its padded seat and backrest. The upholstery is not only soft but also durable, designed to withstand daily use. This seating arrangement ensures that users can rest when needed, reducing fatigue during extended periods of mobility.

One of the standout technologies in the Invacare 1085144 is its folding mechanism, which allows the device to be easily collapsed for transport and storage. This feature is vital for users who travel frequently or need to store the mobility aid in small spaces. The compact size post-folding enhances its portability, making it a convenient option for those who require assistance on the go.

In conclusion, the Invacare 1085144 embodies a thoughtful approach to assistive technology, prioritizing user comfort, mobility, and convenience. With its robust features and innovative design, it serves as an essential tool for enhancing independence and promoting an active lifestyle for individuals with mobility challenges.

SAFETY SUMMARY