Invacare 1085144 operating instructions Installing the Motor Shroud Figure, Detail E Steps

Page 5

DETAIL "D" - STEP 1

REAR of

FRONT of

Motor

Motor

Shroud

Shroud

 

Yellow (+) Wire

FRONT

Hole

 

Blue (-) Wire

REAR Hole

 

 

 

DETAIL "E" STEPS 2-3

DETAIL "F" - STEP 5

POSITIVE (+) Flat Screws

Battery

Channel

Connector

 

 

 

YELLOW

 

 

 

Bare

(+) Wire

End of

 

 

Wire

BLUE (-)

 

Insulated

 

Wire

Wire

 

 

 

NEGATIVE

TIGHTEN

(-) Channel

Flathead Screw (DO

 

Flared End of Battery Connector NOT REMOVE)

 

STEPS 8-10

 

 

YELLOW (+) Wire

 

Battery

Mounting

 

Connector

 

Screws

 

 

 

 

(Nuts NOT

 

 

SHOWN)

BLUE (-)

Wire

Flared End

FIGURE 7 - INSTALLING THE BATTERY

CONNECTOR

Installing the Motor Shroud (FIGURE 8)

CAUTION

The spade connectors MUST be con- nected to the motor as shown in FIG- URE 8 - otherwise, the pendant will op- erate improperly.

1.Connect the spade connector wires to the motor in the following manner:

A.BLACK spade connector wire to lower spade.

B.RED spade connector wire to upper spade.

CAUTION

DO NOT secure the pendant cable be- yond the middle of the cable (measur- ing from the current limit device to the pendant), otherwise damage to the cable may result.

.

2.Secure the pendant cable and the spade connec- tor wire wrap to the motor with the mounting bracket as shown in FIGURE 8.

3.Align the mounting holes of the mounting bracket and motor and secure the mounting bracket with the two

(2) EXISTING mounting screws. Tighten securely.

4.Position the motor shroud over the motor, aligning the mounting holes of the motor shroud and motor.

5.Install the machine screw and washer in the side mounting hole. Tighten securely.

6.Install the two (2) self-locking screws and two (2) washers in the front mounting holes. Tighten securely.

7.Grasp the handgrip on the battery pack and push downwards to install it onto the motor shroud.

WARNING

To prevent frame from tipping when raising the bath lift without the seat installed, ei- ther suction the frame to the floor or place one foot on the frame base.

8.Secure the frame to the floor with the suction cups or by standing on the frame base.

9.Test the operation of the bath lift by pressing the UP and DOWN buttons on the pendant to ensure proper installation of the NEW pendant.

10.Perform one (1) of the following:

PROPER OPERATION - Install the bath lift frame into the bathtub. Refer to INSTALLING BATH LIFT INTO THE BATHTUB in this in- struction sheet.

IMPROPER OPERATION - If the bath lift does not respond correctly when the pendant but- tons are pushed (for example, the lift raises when the DOWN button is pushed) or if it does not work at all, repeat STEPS 1-9 making sure the spade connectors are properly connected.

NOTE: If improper operation exists, contact Invacare at the number on the back of this in- struction sheet before using.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Removing the Seat Figure Safety SummaryPull UP to Remove Lift the SeatRemoving the Motor Shroud Figures 3 Removing the Frame from the Bathtub FigureTilt Frame ForwardsRemoving Current Limit Device Figure Removing the Battery Connector FigureInstalling the Battery Connector Figure Installing NEW Current Limit Device FigureYellow FrontDetail E Steps Installing the Motor Shroud FigureSteps Installing the Bath Lift into the Bathtub FigureStep Pull UP Installing the Seat FigurePress Down on Remove Suction CUPLimited Warranty

1085144 specifications

Invacare 1085144 is a standout product in the realm of mobility aids, designed to enhance the quality of life for users requiring assistance in mobility. This innovative device is engineered with a blend of practicality, comfort, and durability, making it an ideal choice for individuals with limited mobility due to age, injury, or disability.

One of the main features of the Invacare 1085144 is its lightweight aluminum frame, which not only contributes to the overall ease of use but also ensures exceptional strength and stability. The device can support a significant amount of weight, accommodating a diverse range of users. The design is also easy to maneuver, allowing for smooth navigation in various environments, whether indoors or outdoors.

The mobility aid incorporates ergonomic handles that provide a secure grip, reducing the risk of slippage and enhancing user confidence while moving. Additionally, the handles are adjustable, allowing users to customize the height to their specific preferences for maximum comfort. This flexibility is crucial for ensuring that users can maintain proper posture while using the device.

Another notable characteristic of the Invacare 1085144 is its innovative wheel design. The large, durable wheels are equipped with a tread pattern engineered for superior traction, allowing the device to traverse different terrains without difficulty. This feature is particularly beneficial for users who enjoy outdoor activities or require mobility solutions that can handle uneven surfaces.

The Invacare 1085144 also emphasizes user comfort through its padded seat and backrest. The upholstery is not only soft but also durable, designed to withstand daily use. This seating arrangement ensures that users can rest when needed, reducing fatigue during extended periods of mobility.

One of the standout technologies in the Invacare 1085144 is its folding mechanism, which allows the device to be easily collapsed for transport and storage. This feature is vital for users who travel frequently or need to store the mobility aid in small spaces. The compact size post-folding enhances its portability, making it a convenient option for those who require assistance on the go.

In conclusion, the Invacare 1085144 embodies a thoughtful approach to assistive technology, prioritizing user comfort, mobility, and convenience. With its robust features and innovative design, it serves as an essential tool for enhancing independence and promoting an active lifestyle for individuals with mobility challenges.
Top Page Image Contents