Invacare 1085144 operating instructions Installing NEW Current Limit Device Figure, Yellow, Front

Page 4

REAR

Mounting

Screws

 

BLUE and

YELLOW

Battery

Connector

WiresMotor

Shroud

Spade

FRONT

Connector

 

Wires

 

 

Current Limit Device

Nuts

Pendant Cable

FIGURE 6 - REMOVING CURRENT LIMIT

DEVICE

Installing NEW Current Limit Device (FIGURE 6)

1.Position the NEW current limit device on the in- side of the motor shroud with the blue and yellow battery connector wires towards the REAR of the shroud and the pendant cable towards the FRONT of the shroud as shown in FIGURE 6.

2.Align the mounting holes of the current limit device and the motor shroud and secure with the two (2) existing mounting screws and nuts. Tighten se- curely.

3.Install the battery connector. Refer to INSTALLING THE BATTERY CONNECTOR in this instruction sheet.

Installing the Battery Connector (FIGURE 7)

CAUTION

The BLUE (-) and YELLOW (+) wires MUST be installed properly, otherwise, serious damage to the electrical system of the bath lift may occur.

1.Position the BLUE (-) wire through the FRONT hole and the YELLOW (+) wire through the REAR hole as shown in DETAIL "D" of FIGURE 7.

2.If necessary, loosen, but do not remove the two

(2)flat screws in the battery connector (DETAIL "E").

3.Visually inspect the battery connector to find the POSITIVE (+) and NEGATIVE (-) channels. Refer to DETAIL "E" of FIGURE 7.

4.Insert the bare end of the YELLOW (+) wire into the POSITIVE (+) channel.

CAUTION

DO NOT tighten the flat screw onto the insulated portion of the wire. Ensure the screw secures the bare wire ONLY.

5.Tighten the flat screw to secure the wire to the battery connector. Refer to DETAIL "F" of FIGURE 7.

6.Repeat STEPS 4 - 5 to install the BLUE (-) wire into the NEGATIVE (-) channel.

7.Ensure BOTH wires are securely installed in the battery connector.

NOTE: If installed properly, the wires should not pull out of the battery connector when gently tugged.

8.Position the battery connector on the motor shroud with the flared end on the bottom as shown in FIG- URE 7.

9.Align the mounting holes of the battery connector with the mounting holes of the motor shroud.

10.Secure the battery connector to motor shroud with the two (2) mounting screws and nuts. Tighten securely.

11.Install the motor shroud. Refer to INSTALLING THE MOTOR SHROUD in this instruction sheet.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Safety Summary Removing the Seat FigurePull UP to Remove Lift the SeatRemoving the Frame from the Bathtub Figure Removing the Motor Shroud Figures 3Tilt Frame ForwardsRemoving the Battery Connector Figure Removing Current Limit Device FigureInstalling NEW Current Limit Device Figure Installing the Battery Connector FigureYellow FrontInstalling the Motor Shroud Figure Detail E StepsStep Installing the Bath Lift into the Bathtub FigureSteps Installing the Seat Figure Pull UPPress Down on Remove Suction CUPLimited Warranty

1085144 specifications

Invacare 1085144 is a standout product in the realm of mobility aids, designed to enhance the quality of life for users requiring assistance in mobility. This innovative device is engineered with a blend of practicality, comfort, and durability, making it an ideal choice for individuals with limited mobility due to age, injury, or disability.

One of the main features of the Invacare 1085144 is its lightweight aluminum frame, which not only contributes to the overall ease of use but also ensures exceptional strength and stability. The device can support a significant amount of weight, accommodating a diverse range of users. The design is also easy to maneuver, allowing for smooth navigation in various environments, whether indoors or outdoors.

The mobility aid incorporates ergonomic handles that provide a secure grip, reducing the risk of slippage and enhancing user confidence while moving. Additionally, the handles are adjustable, allowing users to customize the height to their specific preferences for maximum comfort. This flexibility is crucial for ensuring that users can maintain proper posture while using the device.

Another notable characteristic of the Invacare 1085144 is its innovative wheel design. The large, durable wheels are equipped with a tread pattern engineered for superior traction, allowing the device to traverse different terrains without difficulty. This feature is particularly beneficial for users who enjoy outdoor activities or require mobility solutions that can handle uneven surfaces.

The Invacare 1085144 also emphasizes user comfort through its padded seat and backrest. The upholstery is not only soft but also durable, designed to withstand daily use. This seating arrangement ensures that users can rest when needed, reducing fatigue during extended periods of mobility.

One of the standout technologies in the Invacare 1085144 is its folding mechanism, which allows the device to be easily collapsed for transport and storage. This feature is vital for users who travel frequently or need to store the mobility aid in small spaces. The compact size post-folding enhances its portability, making it a convenient option for those who require assistance on the go.

In conclusion, the Invacare 1085144 embodies a thoughtful approach to assistive technology, prioritizing user comfort, mobility, and convenience. With its robust features and innovative design, it serves as an essential tool for enhancing independence and promoting an active lifestyle for individuals with mobility challenges.
Top Page Image Contents