Cisco Systems PA-POS-1OC3 manual Cisco 7401ASR Router-Removing and Installing a Port Adapter

Contents

	Cisco 7304 PCI Port Adapter Carrier Card—Removing and Installing a Port Adapter 3-8
	Cisco 7401ASR Router—Removing and Installing a Port Adapter 3-10
	Cisco 7500 Series Routers—Removing and Installing a Port Adapter					3-11
	Cisco 7600 Series Router—Removing and Installing a Port Adapter					3-12
	Connecting PA-POS-1OC3 Interface Cables				3-13
	Replacing the SFP Optics Module		3-14
	Handling the SFP Optics Module			3-14
	Removing the SFP Optics Module			3-14
	Installing the SFP Optics Module			3-15
	Verifying the SFP Optics Module Installation 3-16
	Configuring the PA-POS-1OC3
C H A P T E R 4		4-1
	Using the EXEC Command Interpreter			4-1
	Configuring the Interfaces	4-2
	Shutting Down an Interface		4-3
	Performing a Basic Configuration			4-6
	Customizing the Configuration		4-8
	Setting the MTU Size	4-9
	Configuring Framing 4-9
	Setting the Source of the Transmit Clock				4-9
	Configuring Cyclic Redundancy Checks				4-10
	Configuring SONET Payload Scrambling				4-10
	Configuring APS 4-11

Checking the Configuration 4-12
Using show Commands to Verify the New Interface Status			4-12
Using the show version or show hardware Commands			4-14
Using the show diag Command 4-17
Using the show interfaces Command 4-20
Using the ping Command to Verify Network Connectivity			4-22
Using loopback Commands	4-23
Configuring an Interface for Internal Loopback 4-23
Configuring an Interface for Line Loopback 4-23
Push Mode Description 4-24
PA-POS-1OC3 Statistics Counters		4-25
PA-POS-1OC3 Error Messages	4-25
Making a Back-to-Back Connection		4-25

PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide

OL-6514-03 v