Cisco Systems PA-POS-2OC3 Cisco 7600 Series Router-Removing and Installing a Port Adapter, 3-12

Chapter 3 Removing and Installing the PA-POS-1OC3

Port Adapter Removal and Installation

Cisco 7600 Series Router—Removing and Installing a Port Adapter

Note: You must first remove the Enhanced FlexWAN Module from the chassis before removing a port adapter from the Enhanced FlexWAN Module.

Step 1	Screw
To remove the port adapter,
remove the screw that	A
secures the port adapter (or
blank port adapter). (See A.)

Step 2

With the screw removed, grasp the handle on the front of the

port adapter (or blank port adapter) and carefully pull it out of its bay, away from the edge connector at the rear of the bay. (See A.)

Step 3

To install the port adapter, carefully align the port adapter carrier

between the upper and the lower B edges of the port adapter bay.

(See B.)

Step 4

Carefully slide the new

port adapter into the port adapter bay until the connector on the port adapter is completely seated in the connector at the rear of the port adapter slot. (See B.)

Step 5

Install the screw in the rear of the port adapter bay. Do not overtighten the screw. (See A.)

SUPERVISOR I	CONSOLE
	1%		PCMCIA	EJECT
WS-X6K-SUP1
	100%Switch	Load
2	DTE/				PORT 1
	DCE						PORT 2
SUPERVISOR I	CONSOLE
	1%		PCMCIA	EJECT
WS-X6408
1	2	3	4
3				5	6	7	8
8 PORT GIGABIT ETHERNET
WS-X6408
1	2
4			4	5	6	7
							8
8 PORT GIGABIT ETHERNET
WS-X6408
1	2	3	4
5				5	6	7	8
8 PORT GIGABIT ETHERNET

Slot

guide

Step 6

Reinstall the Enhanced FlexWAN	7	24 PORT 100FX	2				6	7
												11	12			15	16	17			20	21	22
Module in the chassis, and tighten																								23	24
		1	2	3	4	5
		WS-X6224
the captive installation screw on each	8						6	7	8	9	10	11	12	13	14	15	16	17
	LED	24 PORT 100FX																	18	19	20	21	22	23	24
	FAN
side of the Enhanced FlexWAN		WS-X6224
	9	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15
Module faceplate. (See C.)	C	24 PORT 100FX															16	17	18	19	20	21	22	23	24

96929

PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide

3-12 OL-6514-04