Cisco Systems PA-POS-2OC3, PA-POS-1OC3 Port Adapter Slot Locations on the Supported Platforms

Models: PA-POS-1OC3 PA-POS-2OC3

1 90
Download 90 pages 60.94 Kb
Page 18
Image 18
Port Adapter Slot Locations on the Supported Platforms

Chapter 1 PA-POS-1OC3 Overview

Port Adapter Slot Locations on the Supported Platforms

The PA-POS-1OC3 has a single duplex LC-type receptacle. For SONET/SDH single-mode and multimode optical fiber connections, you can use a simplex LC-type cable (see Figure 1-3) for the transmit (TX) and receive (RX) connections.

Figure 1-3 Duplex Patch Cable with LC-type Connectors

 

/ /

/ /

/ /

RX TX

84929

Note For important laser and LED safety information, see the “Laser Safety” section on page 2-11.

Port Adapter Slot Locations on the Supported Platforms

The following sections describe the port adapter slot locations in the supported platforms:

Cisco 7200 VXR Routers Slot Numbering, page 1-8

Cisco 7201 Router Slot Numbering, page 1-9

Cisco 7301 Router Slot Numbering, page 1-10

Cisco 7304 PCI Port Adapter Carrier Card Slot Numbering, page 1-10

Cisco 7401ASR Router Slot Numbering, page 1-11

Cisco 7500 Series Routers with VIP Slot Numbering, page 1-12

Cisco 7600 Series Routers with FlexWAN and Enhanced FlexWAN Modules, page 1-16

Cisco 7200 VXR Routers Slot Numbering

Cisco 7204VXR routers have four slots for port adapters, and one slot for an input/output (I/O) controller. The slots are numbered from the lower left to the upper right, beginning with slot 1 and continuing through slot 4. You can place a port adapter in any of the slots (slot 1 through slot 4). Slot 0 is always reserved for the I/O controller. The Cisco 7204VXR router is not shown.

Cisco 7206VXR routers (including Cisco 7206VXR routers as router shelves in a Cisco AS5800 Universal Access Server) have six slots for port adapters, and one slot for an input/output (I/O) controller. The slots are numbered from the lower left to the upper right, beginning with slot 1 and continuing through slot 6. You can place a port adapter in any of the six slots (slot 1 through slot 6). Slot 0 is always reserved for the I/O controller.

PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide

1-8

OL-6514-04

 

 

Page 18
Image 18
Cisco Systems PA-POS-2OC3 Port Adapter Slot Locations on the Supported Platforms, Cisco 7200 VXR Routers Slot Numbering