Cisco Systems OL-31386-01 specifications Important Safety Instructions

Page 4

–Management Frame Protection (MFP)

–Throughput, forwarding, and filtering performance scaled to meet 3 spatial stream, 1.3-Gbps data-rates

•64 MB flash size

•802.11af/at

–CDP (Cisco Discovery Protocol)

•2.4 GHz and 5 GHz 802.11n radios with the following features:

–4TX x 4RX for 5 GHz and 3Tx x 4Rx for 2.4 GHz

–3-spatial streams, 1.3-Gbps PHY rate

–Spectrum intelligence

–DPD (Digital Pre-Distortion) technology

–Cisco Vector Beamforming—Implicit Co-phase beamforming for .11ag clients and 1x1 11n clients

–Radio hardware is capable of explicit compressed beamforming (ECBF) per 802.11n standard

3Safety Instructions

Translated versions of the following safety warnings are provided in the translated safety warnings document that is shipped with your access point. The translated warnings are also in the Translated Safety Warnings for Cisco Aironet Access Points, which is available on Cisco.com.

Warning

IMPORTANT SAFETY INSTRUCTIONS

 

 

This warning symbol means danger. You are in a situation that could cause bodily injury.

 

 

Before you work on any equipment, be aware of the hazards involved with electrical

 

 

circuitry and be familiar with standard practices for preventing accidents. Use the

 

 

statement number provided at the end of each warning to locate its translation in the

 

 

translated safety warnings that accompanied this device. Statement 1071

 

 

SAVE THESE INSTRUCTIONS

 

 

 

 

 

 

Warning

Read the installation instructions before you connect the system to its power source.

 

 

Statement 1004

 

 

 

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Cisco Aironet 2700 Series Access Points OL-31386-01 Last Updated March 31 Introduction to the Access Point About this GuideSafety Instructions Important Safety Instructions20A. Statement Unpacking ConfigurationsExternal Antennas Internal Antennas Regulatory DomainsAccess Point Ports and Connectors Access Point Ports and Connections top-2702E ModelAccess Point LED Indicator top-2702I Model 352657 Configuring the Access Point Controller Discovery ProcessPreparing the Access Point Installation Summary Performing a Pre-Installation ConfigurationPre-Installation Configuration Setup Controller Layer 3 devices Cisco Aironet access pointsPage Mounting the Access Point Deploying the Access Point on the Wireless NetworkTroubleshooting Guidelines for Using Cisco Aironet Lightweight Access PointsUsing Dhcp Option Checking the Access Point LEDLED Troubleshooting the Access Point Join Process Page Declarations of Conformity and Regulatory Information For Home or Office USEPage Vcci Statement for Japan 03-6434-6500 Statement 371-Power Cable and AC Adapter Industry Canada Canadian Compliance StatementFrench Translation Access Point Models Page Page Declaration of Conformity for RF Exposure Generic Discussion on RF ExposureThis Device Meets FCC Guidelines for Exposure to Radio Waves MPE Additional Information on RF Exposure Chinese Translation English Translation Operation of Cisco Aironet Access Points in Brazil Declaration of Conformity Statements Portuguese TranslationConfiguring Dhcp Option 43 and Dhcp Option Access Point Specifications Add the option 60 line using the following syntax
Top Page Image Contents