Cisco Systems OL-31386-01 specifications Internal Antennas, Regulatory Domains

Page 7

AIR-ANT2524DW-R

AIR-ANT2524DG-R

AIR-ANT2524V4C-R

AIR-ANT2544V4M-R

AIR-ANT2566P4W-R

Internal Antennas

The 2702I model access point is configured with four dual-band inverted-F antennas, and two 2.4-GHz/5-GHz dual-band radios.

There are four antennas deployed inside the access point with one deployed on each corner of the 2702I access point top housing. Each antenna covers both the 2.4 GHz and the 5 GHz bands with a single feed line. The basic features are as follows:

Dual-band inverted-F antenna for use in both the 2.4-GHz and 5-GHz bands.

Antenna unit integrated into the 2702I model access point.

Peak gain is approximately 4 dBi in both 2.4 GHz and 5 GHz bands.

Regulatory Domains

The 2700 series supports the following regulatory domains (shown as “x” in the model numbers):

-A, -C, -D, -E, -F, -H, -I, -K, -N, -Q, -R, -S, -T, -Z

Note Click this URL for the latest list of countries and regulatory domains supported by the AP’s models: www.cisco.com/go/aironet/compliance

The 2700 series also supports the universal regulatory domain, -UX, which has the following model number formats:

AIR-AP2702I-UXK9

AIR-AP2702E-UXK9

Note For information on how to set the regulatory domain and country configurations of a universal regulatory domain access point, see the Cisco Aironet Universal AP Priming and Cisco AirProvision User Guide, at: http://www.cisco.com/c/en/us/td/docs/wireless/access_point/ux-ap/guide/uxap-mobapp-g

.html

7

Image 7
Contents Cisco Aironet 2700 Series Access Points OL-31386-01 Last Updated March 31 About this Guide Introduction to the Access PointImportant Safety Instructions Safety Instructions20A. Statement Unpacking ConfigurationsExternal Antennas Regulatory Domains Internal AntennasAccess Point Ports and Connections top-2702E Model Access Point Ports and ConnectorsAccess Point LED Indicator top-2702I Model 352657 Controller Discovery Process Configuring the Access PointPreparing the Access Point Performing a Pre-Installation Configuration Installation SummaryController Layer 3 devices Cisco Aironet access points Pre-Installation Configuration SetupPage Deploying the Access Point on the Wireless Network Mounting the Access PointGuidelines for Using Cisco Aironet Lightweight Access Points TroubleshootingChecking the Access Point LED Using Dhcp OptionLED Troubleshooting the Access Point Join Process Page For Home or Office USE Declarations of Conformity and Regulatory InformationPage Vcci Statement for Japan 03-6434-6500 Industry Canada Canadian Compliance Statement Statement 371-Power Cable and AC AdapterFrench Translation Access Point Models Page Page Generic Discussion on RF Exposure Declaration of Conformity for RF ExposureThis Device Meets FCC Guidelines for Exposure to Radio Waves MPE Additional Information on RF Exposure Chinese Translation English Translation Operation of Cisco Aironet Access Points in Brazil Portuguese Translation Declaration of Conformity StatementsConfiguring Dhcp Option 43 and Dhcp Option Add the option 60 line using the following syntax Access Point Specifications