Tanita HD-351BT After Initial Pairing, Error Process, Output Data Format Specification

OR

After Initial Pairing

2-1) Before activating the scale, make sure the corresponding Bluetooth device is turned on.

2-2) Press “OUTPUT” key to turn on the scale, as noted by a single beep. The scale will find the previous corresponding Bluetooth device.

*If unable to establish pairing or if no response from the corresponding Bluetooth device within 30 seconds, an error will show on the scale (step 3-1).

2-3) A successful pairing operation between scale and the corresponding Bluetooth device will be noted by a double beep.

2-4) The display will change to the zero calibration display.

2-5) The display will then changed to the waiting display. Step onto the scale and measure weight.

2-6) The weight result will flash after measurement is completed. The weight data will then be sent to the corresponding Bluetooth device.

2-7) To continue with more weighting’s, press “OUTPUT” key (Step 2-4).

2-8) The scale will automatically shut off when ---

*The user remains on the scale for 30 seconds.

*The user get off from the scale, and then after 30 seconds.

Error Process

3-1) Failure to “PAIR” display.

3-2) Display will change to zero calibration display.

3-3) The display will then change to the waiting display. Step onto the scale and measure weight, or to reattempt Bluetooth pairing press “OUTPUT” key (step 1-2).

3-4) The weight result will flash after measurement is completed.

*The weight result data will not be sent to the corresponding Bluetooth device.

*To reattempt Bluetooth pairing, press “OUTPUT” key (step 1-2).

3-5) The scale will automatically shut off when ---

*The user remains on the scale for 30 seconds.

*The user get off from the scale, and then after 30 seconds.

8.Output Data Format Specification

Signal Speed		9600 bps
Start Bit		1 bit
Data Bit Length		8 bits
Parity		None
Stop bit		1 bit
PIN		0000
Output Data
		Heade	Output data (ASCII code)	Substance
Control Data		{0	Fix to 16	2bytes fixed
Control Data		˜0	Fix to 1	1bytes fixed
Model No.		MO	"HD-351BT"	10bytes fixed
Weight	kg	Wk	XXX.X	3 - 5bytes variable length
	lb	Wp	XXX.X	3 - 5bytes variable length
Data
	St-lb	Ws	XX.YY.Y	5 - 7bytes variable length X:st Y:lb
Checksum		CS	XX	2bytes fixed
Note : • The data are divided with commas (,) for each data.				(zero)
			(zero)

• The terminator (end of data) is CR (ASCII code 0D), LF (ASCII code 0A).

[Output example (in the case to lb unit)]

Control Data

Control Data

Model No

Weight Data

Checksum

CR

LF

{0

,

16

,

˜0

,

1

,

MO

,

"HD-351BT"

,

Wp

,

xxx.x

,

CS

,

xx

,

(zero)

(zero)

0D

0A

4 5