Unitron Hearing Aid UMIC manual Important information

Page 18

Important information

Do not charge uMic from a PC or laptop USB port. This may damage your equipment.

Changes or modifications to any of the devices that were not explicitly approved by Unitron are not permitted.

External devices may only be connected if they have been tested in accordance with corresponding IECXXXXX standards. Only use accessories approved by Unitron.

The battery may only be replaced by authorized personnel. Do not attempt to open the product or remove the battery as this may cause injury or damage to the product.

Dispose of electrical components in accordance with your local regulations.

The mini-USB port is to be used for the described purpose only.

Information on product safety

Turn off the uMic when not in use.

Always plug in the uDirect 2 neckloop and wear it around the neck when transmitting signals to your hearing aids.

Protect the device connectors, plugs, charging slot and power supply from dirt and debris.

Protect all devices from excessive moisture (bathing or swimming areas) and heat sources (radiator, TV top). Protect devices from excessive shock and vibration.

Clean devices using a damp cloth. Never use household cleaning products (washing powder, soap, etc.) or alcohol to clean them. Never use a microwave or other heating devices to dry any of the devices.

The digitally-coded, inductive transmission technology used in these devices is extremely reliable and experiences virtually no interference from other devices. It should be noted, however, that when operating the system near computer equipment, larger electronic installation or

30

31

Image 18 Unitron Hearing Aid UMIC manual Important information
Contents Unitron uMic guide Thank you Your uMicThank you for choosing the Unitron uMic Table of contents Quick referenceYour uMic at a glance Retaining clipGetting started Charging the uMicUDirect 2 into Turning the uMic on and off Pairing the uMic with uDirect Put uDirect 2 into pairing mode Switch on the uDirectPut uMic into pairing mode Information about power and battery Understanding the status light Information during operationUMic UDirect Connecting the uMic and uDirect Preparing the uDirectSetting the uMic volume Functional test of uMicWearing the uMic correctly UMic pause and resumeSwitching the uMic off Switch the uMic off when not in useSpecial use cases UMic and watching TV Dedicated uTVCharger plugged in while Support of multiple uMics Use of the lanyardTroubleshooting guide Short press the uDirect 2 access button to resume streamingThere is too much noise, I cannot understand the speaker Chargers 5VDC, min mA Providing enough By Unitron Charging currentImportant information Compliance information Other important informationDeclaration of Conformity Information and explanation of symbols Reorient or relocate the receiving antennaOperating conditions Transport and storage conditions0678 Distributor