Preparing the uDirect 2
1.Turn the uDirect 2 on.
2.Always wear the uDirect 2 around the neck.
3.Make sure both plugs are well connected in the neckloop sockets.
For a more detailed explanation of the uDirect 2, please refer to the uDirect 2 user guide.
Connecting the uMic and uDirect 2
Every time the devices are turned on, they will connect with each other automatically.
1.Make sure the uDirect 2 and uMic are within 2 meters (6ft) range of each other.
2. | Turn the uMic on. | green | |
3. | The indicator light will turn green | ||
| |||
| first. |
| |
4. | Wait until the indicator lights of | blue | |
| both devices turn solid blue. This | ||
|
| ||
| may take up to 30 seconds but |
| |
| usually occurs within 5 seconds. |
|
The uDirect 2 will confirm the connection via spoken notifications or beeps in your hearing aids, depending on the uDirect 2 configuration.
If the status light is rapidly blinking blue after turning on the uMic or if the status light does not turn solid blue within two minutes, repeat the pairing.
12 | 13 |