
Pairing the uMic with uDirect 2
Before using the uMic with a streamer for the first time, the devices must be paired with each other.
If you are not using uDirect 2 but another streamer, please follow the Bluetooth pairing procedure of that device.
Put uDirect 2 into pairing mode:
1.Switch on the uDirect 2 (
).
2.Press and hold the connect () and volume (
) buttons simultaneously for 2 seconds until the audio indicator starts to rapidly
blink blue. The uDirect 2 will remain in pairing mode for two minutes or until the pairing is complete.
2 sec
Put uMic into pairing mode:
If the uMic has never been paired before, pairing mode will be automatically activated after turning it on.
To manually start pairing mode:
1. Switch the uMic off.
2. Press and hold the volume up button ().
3. Turn the uMic on while still pushing the () button.
4. Release the () button after
2 seconds when the indicator light rapidly blinks blue.
5.Make sure the uDirect 2 and uMic are within 1 m (3 ft) range of each other.
The uMic will remain in pairing mode for two minutes or until the pairing is completed.
8 | 9 |