Tanita 4800 specifications Assembly Instructions, Before Assembly, Assembling the Wheelchair Scale

Page 3

ASSEMBLY INSTRUCTIONS

Before Assembly

NOTE: Carefully inspect all cartons for shipping damage before unpacking. If damage is found, contact your shipper or Tanita Corporation immediately. Claims must be filed with the shipper as soon as possible after receipt of the damaged package.

One carton containing: Scale folded in transport position and 2 parts boxes

One parts box containing: AC adapter and storage bracket, C-clamp, four (4) threaded feet, four (4) locknuts, and sheet of adhesive labels.

Another small box containing: The electronic control panel box.

IMPORTANT: After assembling the scale, charge the battery in the control panel box using the procedure under “Charging the Battery” on page 3. This will restore any power lost during storage and shipment.

Tools Needed: Adjustable wrench or 5/8" socket or open-end wrench.

Assembling the Wheelchair Scale

1.With the scale still in the carton, place the carton on the floor with the wheels facing the floor.

2.Carefully slide the scale out of the carton so that the scale is resting on its wheels. In this position the scale is in its TRANSPORT position and can be wheeled from one location to another.

3.Install the four (4) leveling feet into the threaded holes located in each corner of the platform underside. Turn each foot into the threaded hole until 1/4" to 3/8" is showing. (Fig. 1)

4.On each side bracket at the base of the handlebar is a silver locking pin with silver pull ring. This locking pin is used to lock the scale into either its present TRANSPORT position (Fig. 1), or in the unfolded WEIGHING position (Fig. 3); the pin uses the second set of holes in the side bracket.

5.Lay the platform down on its feet (Fig. 2). Pull each locking pin and swing the handlebar into the upright WEIGHING position. Lock the handlebar by inserting the pin into the second (bottom) set of holes.

Parts and Accessories

Description

Part No.

Battery Transformer

63812

Rechargeable Battery

63648

Display Board w/cable

63663

Fig. 1

Leveling Foot 63869

Fig. 2

Fig. 3

Pounds

Kilos

WEIGHT

 

Push “ON” button

ZERO

and wait until zero

POUNDS

appears before

stepping on

KILOS

scale

 

ON

 

OFF

Locking Pin 63963

2

Image 3
Contents OPERATOR’S Manual Do not leave patients unattended on the scale Assembly Instructions Before AssemblyAssembling the Wheelchair Scale Control Panel Box Charging the BatteryAttaching Control Panel Box to Scale Leveling the PlatformAs a Wheelchair Scale Special FeaturesSpecifications Operating InstructionsWeighing the Chair Taking a Weight MeasurementAs a Chair Scale As a Stand-on ScaleCalibration Care and MaintenanceCleaning TroubleshootingComputer Board Parts ListWarranty How to Obtain Warranty ServiceTanita Corporation of America, Inc