Panasonic KX-HNC600 manual Specifications

Page 27

 

Appendix

 

R Dimensions

 

Specifications

Approx. 75 mm × 75 mm × 173 mm (2

15/16 inches × 2 15/16 inches × 6 13/16

R Standards

inches)

DECT 6.0 (Digital Enhanced Cordless

R Mass (weight)

Telecommunications 6.0)

Approx. 305 g (0.67 lb)

R Frequency range

*1 The IR-LED will be lighted at the low

DECT: 1.92 GHz – 1.93 GHz

illuminance conditions.

R RF transmission power

*2 Water resistance is only assured if the

DECT: 115 mW (max.)

camera is installed correctly according to

R Power source

the instructions in the Installation Guide,

120 V AC, 60 Hz

and appropriate water protection

R Power consumption

measures are taken. Do not install the

Standby: 1.4 W

camera in areas directly exposed to water

During operation:

or rain.

1.5W (when the LED lights are not lit)

2.3W (when the LED lights are lit)

ROperating conditions

-20 °C – 50 °C (-4 °F – 122°F) up to 90% relative humidity (non-condensing)

RTransmitting range

Approx. 50 m (160 feet) indoors Approx. 300 m (1,000 feet) outdoors

RImage sensor

0.3 megapixel CMOS

RMinimum illuminance required 0 lx*1

RFocal length

Fixed (0.4 m (1.3 feet) – infinity)

RAngular field of view (camera angle) Horizontal: approx. 70°

Vertical: approx. 50°

RMotion detection method

Pyroelectric infrared sensor (PIR sensor) and visual sensor

RPIR sensor detection range (when the surrounding temperature is approx. 25 °C (77 °F))

Horizontal: approx. 70°

Vertical: approx. 20°

Detection range: approx. 5 m

RVisual sensor detection range Horizontal: approx. 70° Vertical: approx. 50°

RIP rating IP55*2

RAdjustable mounting angles Horizontal: ±90°

Vertical: facing forward - facing down approx. 60°

(adjustable when mounting)

For assistance, please visit www.panasonic.com/support

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Thank you for purchasing a Panasonic product Home Network System Outdoor CameraTable of Contents Trademarks Accessory informationSupplied accessories Other informationOperating safeguards For your safetyPower connection InstallationFor best performance Important safety instructionsCamera image quality Privacy and rights of portraitOther information Routine careImportant Information Visual sensor Wireless communication rangeInformation about sensor features Detection methodDetection range Main characteristicsDirection of motion Installation location examples Want to detect visitors approaching the houseIdeal example Poor example Want to detect people entering the garage Installing in the following areas may cause false detections Do not install in these locationsInstallation Location LED indicator Setup overviewPart names and functions Confirming the registration area Using registration buttonsUsing the app Registering the cameraSiding InstallationInstallation precautions Wall material informationIdeal example ALC autoclaved lightweight cellular concreteConcrete Other materials mortar, tile, etcInstalling the camera Setup AC adaptor connection Power failureSensor range cap types and detectable area Testing the motion detection rangeAdjusting the infrared sensor range Testing the microphoneWhen you want one Side to be UndetectableBoth sides to be Undetectable About the attachment angle of the sensor range cap Replacing sensor range caps Accessing the User’s Guide Features available when using the Home Network appSpecifications FCC RF Exposure Warning FCC and other informationOr, send your request by E-mail to Customer servicesOr, contact us via the web at For hearing or speech impaired TTY users, TTYWarranty For United States and Puerto Rico Limited Warranty CoverageMail-In Service--Online Online Repair Request When you ship the product Limited Warranty Limits And ExclusionsFor your future reference If your product is not working properly
Top Page Image Contents