Panasonic KX-HNC600 manual About this system, For your safety, Power connection, Installation

Page 4

Important Information

About this system

This system is an auxiliary system; it is not designed to provide complete protection from property loss. Panasonic will not be held responsible in the event that property loss occurs while this system is in operation.

For your safety

To prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product.

WARNING

Power connection

RUse only the power source marked on the product.

RDo not overload power outlets and extension cords. This can result in the risk of fire or electric shock.

RCompletely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.

RRegularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.

RUnplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at www.panasonic.com/contactinfo

RUnplug from power outlets and never touch the inside of the product if its casing has been broken open. Danger of electric shock exists.

RNever touch the plug with wet hands. Danger of electric shock exists.

RDo not connect non-specified devices.

RWhen opening holes in walls for installation or wiring, or when securing the power cord,

make sure you do not damage existing wiring and ductwork.

RDo not leave the power cable exposed outdoors.

Installation

RTo prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture.

RDo not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.

RDo not allow the power cord to be excessively pulled, bent or placed under heavy objects.

RDo not mount the bracket in an unstable location, in a location subject to frequent vibration, on a ceiling, or on a weak wall.

(Do not mount on gypsum board, concrete blocks, wooden materials exposed to the outdoors, walls with very rough surfaces, or surfaces that are narrower than the width of the wall mount bracket.) There is a risk of injury if the product falls, or of fire or electric shock if water enters the product.

RKeep small parts (microSD cards, screws, washers, sensor range caps, etc.) out of the reach of children. There is a risk of swallowing. In the event they are swallowed, seek medical advice immediately.

Operating safeguards

RUnplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners.

RDo not disassemble the product.

RKeep the sensor range caps out of the reach of children. There is a risk of swallowing. In the event they are swallowed, seek medical advice immediately.

RNever put metal objects inside the product. If metal objects enter the product, turn off the circuit breaker and contact an authorized service center.

4

For assistance, please visit www.panasonic.com/support

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Home Network System Outdoor Camera Thank you for purchasing a Panasonic productTable of Contents Accessory information Supplied accessoriesOther information TrademarksFor your safety Power connectionInstallation Operating safeguardsImportant safety instructions For best performancePrivacy and rights of portrait Other informationRoutine care Camera image qualityImportant Information Wireless communication range Information about sensor featuresDetection method Visual sensorMain characteristics Detection rangeDirection of motion Want to detect visitors approaching the house Installation location examplesIdeal example Poor example Want to detect people entering the garage Do not install in these locations Installing in the following areas may cause false detectionsInstallation Location Setup overview LED indicatorPart names and functions Using registration buttons Using the appRegistering the camera Confirming the registration areaInstallation Installation precautionsWall material information SidingALC autoclaved lightweight cellular concrete ConcreteOther materials mortar, tile, etc Ideal exampleInstalling the camera Setup Power failure AC adaptor connectionTesting the motion detection range Adjusting the infrared sensor rangeTesting the microphone Sensor range cap types and detectable areaSide to be Undetectable When you want oneBoth sides to be Undetectable About the attachment angle of the sensor range cap Replacing sensor range caps Features available when using the Home Network app Accessing the User’s GuideSpecifications FCC and other information FCC RF Exposure WarningCustomer services Or, contact us via the web atFor hearing or speech impaired TTY users, TTY Or, send your request by E-mail toLimited Warranty Coverage Warranty For United States and Puerto RicoMail-In Service--Online Online Repair Request Limited Warranty Limits And Exclusions When you ship the productIf your product is not working properly For your future reference

KX-HNC600 specifications

The Panasonic KX-HNC600 is an advanced indoor surveillance camera designed to enhance home security with its array of features and technologies. This device is part of Panasonic's Smart Home Monitoring system, which provides homeowners with peace of mind through high-quality video monitoring.

One of the standout features of the KX-HNC600 is its high-definition video quality. The camera delivers 1080p resolution, ensuring that every detail is captured with clarity. This functionality is further enhanced by night vision capabilities, allowing the camera to operate effectively in low-light conditions. Users can monitor their homes around the clock, as the KX-HNC600 automatically switches from day to night mode, ensuring continuous surveillance.

The camera is equipped with a wide-angle lens, which provides a broader field of view compared to standard cameras. This feature is particularly beneficial for monitoring large areas without the need for multiple cameras. Additionally, the KX-HNC600 supports pan and tilt functionality, enabling users to remotely control the camera's position via a mobile app. This flexibility allows homeowners to focus on specific areas of interest, enhancing overall security.

Another noteworthy aspect of the KX-HNC600 is its two-way audio feature. This functionality allows users to communicate through the camera, making it possible to interact with visitors or deter unwanted intruders. The integration of sound adds an extra layer of security, as homeowners can address potential threats in real-time.

The KX-HNC600 employs advanced motion detection technology, which can send instant alerts to users’ mobile devices when movement is detected. This feature ensures that homeowners are notified of any unusual activity, allowing for prompt action if necessary. The camera also supports cloud storage options, enabling users to save and review recorded footage.

Furthermore, the KX-HNC600 is designed with user convenience in mind. It is easy to set up and can be integrated into existing smart home ecosystems. With compatibility for various smart devices, homeowners can enjoy seamless connectivity and management through a single app.

In summary, the Panasonic KX-HNC600 stands out as a versatile and efficient surveillance solution. With its high-definition video quality, wide-angle lens, pan-and-tilt capabilities, two-way audio, and advanced motion detection, it offers a comprehensive approach to enhancing home security. Its user-friendly design and smart home compatibility make it an ideal choice for those looking to invest in reliable and advanced monitoring technology.
Top Page Image Contents