Appendix
Testing the motion detection range
After you have installed the [Home Network] app on your mobile device, you can use your mobile device to test the performance of the camera’s motion detection features.
For details about these operations, refer to the User’s Guide (page 26).
1Start the [Home Network] app and display live images from the camera.
2Move to an area within the camera’s viewable area.
3While moving near the camera, use your mobile device to observe where you are in the viewable area when the camera’s motion detection features are triggered.
R When the motion detection features are triggered, the camera’s LED indicator lights in red for about 3 seconds.
4Note the areas of the viewable area where movement is detected, and make adjustments as necessary.
Note:
RYou can adjust the area detectable by the visual sensor. For more information, refer to the User’s Guide (page 26).
RYou can adjust the area detectable by the infrared sensor. See “Adjusting the infrared sensor range”, page 22.
Testing the microphone
To test the microphone, speak loudly and clearly into the microphone while a mobile device user is viewing live images from the camera.
Adjusting the infrared sensor range
If there are objects that you do not want the infrared sensor to detect, you can adjust the detectable area by attaching sensor range caps.
Sensor range cap types and detectable area
In addition to the standard cap (already attached to the camera), there are 4 cap types (cap
RThe detectable areas shown here are an approximation for when the [IR Sensor] setting is set to [Normal]. For more information, refer to the User’s Guide (page 26).
RThe detectable area rotates according to the sensor range cap angle.
22For assistance, please visit www.panasonic.com/support