Setup
Installing the camera
1Attach the safety wire to the camera. R Place the ring of the safety wire (A)
over the screw hole.
R Place a washer (B) on top of the ring of the safety wire.
R Tighten the screw (C) for the safety wire on top of the washer.
3 2 1
2Attach the camera mounting stand to an outdoor wall.
R Secure the stand to the wall by tightening 4 screws (A).
R 1 37 mm (1 15/32 inches)
1
1
1
1
Note:
RUse the following template below when determining the location of the screw holes.
37 mm
(1 15/32 pulgadas)
37 mm
(1 15/32 pulgadas)
For assistance, please visit www.panasonic.com/support | 19 |