Panasonic KX-HNC600 manual AC adaptor connection, Power failure

Page 21

Setup

5Attach the safety wire to the wall.

R Place the ring of the safety wire (A) on the wall.

R Place the washer (B) on top of the ring of the safety wire.

R Tighten the screw (C) for the safety wire on top of the washer.

2 1

3

Note:

RAttach the safety wire while it is bent.

RAttach the safety wire high on the wall so that the camera does not strike anyone in the event the camera detaches from the wall.

RDo not hang from the camera or stand.

6Connect the DC cable to the AC adaptor. R Pull the DC cable indoors, and connect

the DC cable plug (A) to the AC adaptor plug (B).

R Connect the AC adaptor (C) to the power outlet.

1 Outdoors

2 Indoors

1	2
	1 2
	3

Note:

RUse only the supplied Panasonic AC adaptor PNLV236.

RBe sure to connect the DC cable plug and AC adaptor plug indoors.

Note about power connections

AC adaptor connection

RThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

RThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

Power failure

RThe camera will not work during a power failure.

For assistance, please visit www.panasonic.com/support

21

Image 21

Contents Thank you for purchasing a Panasonic product Home Network System Outdoor CameraTable of Contents Supplied accessories Accessory informationOther information TrademarksPower connection For your safetyInstallation Operating safeguardsFor best performance Important safety instructionsOther information Privacy and rights of portraitRoutine care Camera image qualityImportant Information Information about sensor features Wireless communication rangeDetection method Visual sensorDetection range Main characteristicsDirection of motion Installation location examples Want to detect visitors approaching the houseIdeal example Poor example Want to detect people entering the garage Installing in the following areas may cause false detections Do not install in these locationsInstallation Location LED indicator Setup overviewPart names and functions Using the app Using registration buttonsRegistering the camera Confirming the registration areaInstallation precautions InstallationWall material information Siding Concrete ALC autoclaved lightweight cellular concrete Other materials mortar, tile, etc Ideal exampleInstalling the camera Setup AC adaptor connection Power failureAdjusting the infrared sensor range Testing the motion detection rangeTesting the microphone Sensor range cap types and detectable areaWhen you want one Side to be UndetectableBoth sides to be Undetectable About the attachment angle of the sensor range cap Replacing sensor range caps Accessing the User’s Guide Features available when using the Home Network appSpecifications FCC RF Exposure Warning FCC and other informationOr, contact us via the web at Customer servicesFor hearing or speech impaired TTY users, TTY Or, send your request by E-mail toWarranty For United States and Puerto Rico Limited Warranty CoverageMail-In Service--Online Online Repair Request When you ship the product Limited Warranty Limits And ExclusionsFor your future reference If your product is not working properly