American Standard ICU Sink System Install and Connect Mixing Valve Mixing Valve is Optional

9 CONNECT WATER SUPPLY TO ENCLOSURE AND TO COLD OR TEMPERED WALL SUPPLY

1.Insert FIBER WASHER (4) into SUPPLY NUT (1) on ENCLOSURE (2).

2.Connect SUPPLY NUT (1) on ENCLOSURE (2) to FLEXIBLE

SUPPLY HOSE (3). Tighten to make a water tight connection. Use two wrenches to tighten if necessary.

3.Connect FLEXIBLE SUPPLY (3) directly to wall supply. Connection on FLEXIBLE SUPPLY (3) is 3/8" compression. Use adjustable wrench to tighten connection. Do not over tighten.

Note: FLEXIBLE SUPPLY (3) measures 20" from the bottom of the ENCLOSURE (1) base. If additional supply length is required, installer must purchase parts separately. Important: If FLEXIBLE SUPPLY (3) is too long, loop to avoid kinking.

2	1
	4	ELECTRONIC
		BOX
	3	COLD WATER
	3	OR TEMPERED
		WALL SUPPLY

10 INSTALL AND CONNECT MIXING VALVE (MIXING VALVE IS OPTIONAL)

1.Remove COVER from MIXING VALVE.

2.Install FIBER SEAL WASHER (4) on MIXING VALVE NIPPLE (3). Hold MIXING VALVE (1) in place with one hand and with your other hand thread SWIVEL NUT (2) onto MIXING VALVE NIPPLE (3). Use an adjustable wrench to tighten SWIVEL NUT (2).

3.Place MIXING VALVE BOX onto MOUNTING PLATE. Align BOX with mounting holes. Attach with SCREWS provided.

4.Replace COVER and tighten securely.

NOTE: For complete detailed installation and operating instructions see installations instructions supplied with mixing valve. No. M968808

24

3

1

ADJUSTABLE

WRENCH

2

No. M968808

Instructions	SELECTRONIC™
	Thermostatic Mixing Valve
	605XTMV
Installation	M968808	Speci￿cations	1
		Installation	2
		Adjust Temperature	3
		Service	3
	Certified to comply with ASME A112.18.1M	Replacement Parts	4
	© 2005 American Standard

NOTE TO INSTALLER: Please give this manual to the customer after installation.

To learn more about American Standard Faucets visit our website at: www.us.amstd.com or U.S.

customer's e-mail us at: faucetsupport@amstd.com

For Parts, Service, Warranty or other Assistance,

please call 1-800-442-1902 (In Canada: 1-800-387-0369)

(In Toronto Area only: 1-905-3061093)

12 CONNECT MIXING VALVE TO WATER SUPPLIES

1.Turn off Hot and Cold water supplies before beginning.

2. Connect FLEXIBLE SUPPLIES directly to wall supplies. Connections on MIXER supplies are 3/8" compression. Connect left supply to Hot and right supply to Cold wall supply. Use adjustable wrench to tighten connections. Do not over tighten.

3.Faucet supplies measure 20" from the bottom of the ENCLOSURE (3) base.

Note: If additional supply length is required, installer must purchase parts separately.

11 ELECTRICAL HOOK-UP AND INSTALLATION

For complete detailed installation and operating instructions see installations instructions supplied with ICU FAUCET. No. M965119

Important: If SUPPLY HOSES (1, 2) are too long, loop as to avoid kinking.

No. M965119

Instructions	SELECTRONIC™	MODEL NUMBERS
	Proximity ICU Faucet	6055.193
		6056.193
Installation	M 9 6 5 119	Product No.'s & Options	1
		Specifications	2
		How to Install	2-3
	6055 / 6056 ICU Faucet shown Installed on	Electrical Hook-up	4-6
	American Standard 9118.111 ICU Sink
		Maintenance	7-8
		FAQ,s	9
	Certified to comply with ASME A112.18.1M	Replacement Parts	10
	© 2011 American Standard

NOTE TO INSTALLER: Please give this manual to the customer after installation.

To learn more about American Standard Faucets visit our website at: www.americanstandard.com

or U.S. customer's e-mail us at: faucetsupport@americanstandard.com

For Parts, Service, Warranty or other Assistance,

please call 1-800-442-1902 (In Canada: 1-800-387-0369)

(InTorontotoAreaonly::1--905--306-1093)

ELECTRONIC

BOX

HOT

1

MIXING VALVE

COLD

2

7301793-100 Rev. D 4