
INSTALLING THE RELIANT SCALE (FIGURE 2)
1.Position the load cell assembly of the Reliant Scale into the boom mounting bracket. Refer to DETAIL "A" in FIGURE 2.
NOTE: For 9805 lift use
2.Secure the Reliant Scale to the boom mounting bracket with a shoulder bolt, one (1) small steel washer, two (2) nylon washers and a locknut. Securely tighten. Refer to DETAIL "A" in FIGURE 2 for washer orientation.
NOTE: Ensure the shaft of the shoulder bolt passes through both sides of the boom mounting bracket.
3.Insert swivel bar pin with two (2) nylon washers through the swivel bar. Refer to DETAIL "B" in FIGURE 2.
4.Align the mounting holes in the swivel bar pin with the mounting holes in the load cell assembly. Refer to DETAIL "B" in FIGURE 2.
5.Secure swivel bar pin to the load cell assembly with the provided mounting screw and locknut. Securely tighten. Refer to DETAIL "B" in FIGURE 2.
6.Weigh the patient. Refer to OPERATING THE SCALE in this instruction sheet.
DETAIL "A"
Boom |
| |
Locknut | Small | |
| ||
| Steel | |
Boom | Washer | |
| ||
Mounting |
| |
Bracket |
| |
| Shoulder | |
Nylon | Bolt | |
| ||
Washer | Nylon | |
| Washer | |
Reliant | Load | |
Scale | ||
Cell | ||
|
Reliant
Scale
Mounting
Screw
DETAIL "B"
Locknut
Swivel Bar
Assembly |
Nylon Washers
Swivel Bar Pin
FIGURE 2 - INSTALLING THE RELIANT SCALE
Reliant Scale | 4 | Part No. 1114832 Rev B |