LG Electronics 47WV50BR, 47WV50MS Network Status, Tips for Network Setting, Ting the network

Page 26

26ENTERTAINMENT

ENGLISH

NOTE

yyIf you want to access the Internet directly on your display, the Internet connection should always be on.

yyIf you cannot access the Internet, check the network conditions from a PC on your network.

yyWhen you use Network Setting, check the LAN cable or check if DHCP in the router is turned on.

yyIf you do not complete the network settings, the network may not work properly.

Tips for Network Setting

yyUse a standard LAN cable with this display. Cat5 or better with a RJ45 connector.

yyMany network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the network, quickly power off and/or disconnect the power cable of the network router or cable modem. Then power on and/or connect the power cable again.

yyDepending on the Internet service provider (ISP), the number of devices that can receive Internet service may be limited by the applica- ble terms of service. For details, contact your ISP.

yyLG is not responsible for any malfunction of the display and/or the Internet connection feature due to communication errors/malfunctions as- sociated with your Internet connection, or other connected equipment.

yyLG is not responsible for problems within your internet connection.

yyYou may experience undesired results if the network connection speed does not meet the requirements of the content being accessed.

yySome internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your Internet connection.

yyAny fees charged by an ISP including, without limitation, connection charges are your respon- sibility.

yyA 10 Base-T or 100 Base-TX LAN port is required when using a wired connection to this display. If your internet service does not allow for such a connection, you will not be able to connect the display.

yyA DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this display or you may be limited to the number of devices you can connect at the same time. (If your ISP limits sub-scription to one device, this display may not be allowed to connect when a PC is already connected.)

yyThe use of a “Router” may not be allowed or its usage may be limited depending on the poli- cies and restrictions of your ISP. For details, contact your ISP directly.

Network Status

1Press SETTINGS to access the main menus.

2Press the navigation buttons to scroll to NETWORK and press OK.

3Press the navigation buttons to select Network Status.

4Press OK to check the network status.

5When you are finished, press EXIT.

Option

Description

Setting

Return to the network setting menu.

Test

Test the current network status after set-

ting the network.

 

Close

Return to the previous menu.

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Monitor Signage Table of Contents Daisy Chain Monitors RGB Cable DVI Cable Licenses Accessories Assembling and Preparing47WV50BS Parts47WV50BR / 47WV50MS Connection panelTo Install in a Portrait Layout Remove L-brackets before InstallationStorage Method for Panel Protection Correct Method Incorrect MethodInstalling on a Wall »» Only using furniture that can safely support the product Securing the product to a wall optionalExternal Equipment Setup Example of 2 x 2 Tiling How to Mount the SetTiling Displays How to Join Sets Volume Up / Down Remote ControlTurn off the monitor Selects the input mode A Button This modelNavigation Buttons USB Menu control buttonsDisplaying the Device Name Connected to an Input Port RGB Connection Using the Monitor SETConnecting to a PC DVI Connection Hdmi ConnectionDisplay Port Connection IR Receiver ConnectionCustomizing Image Options Adjusting the ScreenSelecting an Image Mode Customizing PC Display Options Adjusting the SoundSelecting an Sound Mode Customizing Sound Options Using Additional OptionsAdjusting Aspect Ratio Just Scan Component Using the Input ListSelecting an Input Source Display PortEntertainment Connecting to a Wired NetworkSelect IP Auto Setting or IP Manual Setting Ting the network Tips for Network SettingNetwork Status Close Return to the previous menuConnecting USB Storage Devices Tips for Using USB Storage DevicesGreen Photo List Music List, Music List Browsing FilesButton Description Or Movie List Photo ListExternal Subtitle format *.smi/*.srt/*.sub Supported File FormatType Supported file format Movie PhotoViewing Movies Button Description Stops the playback Plays a videoMusic List excluding Movie List Video Play., Set Video. or Set Audio.Not affect Photo List and Music List Language Menu Description Picture SizeAudio SubtitleViewing Photos USB1Photo options Using Photo OptionsYy TransitionEffect Set the view mode of the slideshow Option DescriptionTransition Effect Option Listening to Music Music ListControl playback by using the following buttons Tips for playing music filesViewing the Contents List DivX VOD Guide DivX VOD RegistrationPhoto List Using PIP/PBPMovie List Customizing Settings Accessing the Main MenusSmart Energy Picture SettingsPicture Mode SavingBasic Image Options Advanced Control Audio Settings Option Infinite SoundTime Settings Option Settings Auto Config Setting Description Factory ResetTile Mode Option ModeUSB Content When it is offCurrent temperature inside the set RecoveryTile Mode Tile Mode Natural modeMain screen PBP Picture By Picture Displays the sub Screens USB device ModePIP Picture In Picture Displays the sub screen Screen next to the main screenPicture ID Picture ID OffNetwork Settings Speaker Making ConnectionsHD Receiver Camcorder/Camera Gaming deviceDVI Connection Component Connection Avcvbs ConnectionLAN Connection Connecting to the LANConnecting to a USB DVI Cable Daisy Chain MonitorsRGB Cable No image is displayed TroubleshootingProblem Resolution After-image appears on the product Audio function does not work Problem ResolutionScreen image looks abnormal Screen has poor color resolution Specifications LCD PanelApplicable only for models that support the speakers HDMI/DVI/Display PortPC supported mode RGB PC supported modeDTV Mode Resolution Horizontal Vertical FrequencykHz FrequencyHzIR Codes Code Hexa FunctionControlling the Multiple Product Connecting the cableRS-232C Configurations Communication ParameterCommand Reference List HexadecimalEnglish Acknowledgement Transmission / Receiving ProtocolTransmission Energy Saving Command j q To set the Energy Saving function Power Command k aInput Select Command x b Picture Mode Command d x To select the Picture ModeColor Command k Position Command f q Brightness Command k h Tint Command k jSharpness Command k k Auto Configuration Command j u Position Command f rSize Command f s Balance Command k t To adjust the sound balanceVolume Mute Command k e Bass Command k s Volume Control Command k fSpeaker Command d To control the Volume Mute on/offOff TimerRepeat Mode/ Time Command f e To set the Off TimerRepeat Mode/ Time functionAutomatic Standby Command m n On Timer Input Command f u Sleep Time Command f fPower On Delay Command f h Fail Over Select Command m i To set the Fail Over function Language Command f i To set the language for OSDISM mode Command j p Tile Mode Command d d Tile ID Command dReset Command f k DPM Select Command f j Tile H Size Command d gNatural Mode In Tile Mode Command d j Tile V Size Command d h To adjust the Tile Vertical sizeElapsed time return Command d l FAN Fault Check Command d w Key Command m cTemperature Value Command d n OSD Select Command k l Remote Controller Lock/ Key LockSerial No.Check Command f y To check the Serial Numbers Backlight Command m g To adjust the screen backlightPC Power Control Command d t PC Power Command d s Control the PC powerEnglish English Model
Top Page Image Contents