ENGLISH
66CONTROLLING THE MULTIPLE PRODUCT
CONTROLLING THE MULTIPLE PRODUCT
yyUse this method to connect several products to a single PC. You can control several products at one time by connecting them to a single PC.
yyIn the Option menu, Set ID must be between 1 and 255 without being duplicated.
Connecting the cable
Connect the
yyThe
PC
Monitor Set 1 Monitor Set 2 Monitor Set 3 Monitor Set 4
RS-232C Configurations
8-Wire Configurations (Cross-over RS-232C cable)
NOTE
PC
DCD 1
RXD 2
TXD 3
GND 5
DTR 4
DSR 6
RTS 7
CTS 8
Set
1 | DCD |
3 | TXD |
2 | RXD |
5 | GND |
6 | DSR |
4 | DTR |
8 | CTS |
7 | RTS |
yyWhen using
Communication Parameter
yyBaud Rate : 9600 BPS
yyData Length : 8 bit
yyParity Bit : None
yyStop Bit : 1 bit
yyFlow Control : None
yyCommunication Code : ASCII code yyUse a crossed (reverse) cable