F3 - Use of
After entering the Function Mode:
a)Press “3.”
The display will show either “F3 0” or “F3 1”.
If “F3 0” is displayed, the
If “F3 1” is displayed, the
b)To Change Between Equations:
Press either “0” or “1” and the display will show the change. Press ENTER if this is the correct change.
c)To Exit the Function Mode, turn the unit OFF.
F4 - Color Fitness Analysis/Standard Fitness Analysis Selection
After entering the Function Mode:
a)Press “4”
If “0” is displayed, the unit is set to print using the Color Forms.
If “1” is displayed, unit is set to print Fitness Analysis on plain paper.
b)To change, press “0” or “1”. Press ENTER to save the change.
c)To Exit the Function Mode, turn the unit OFF.
31