Futrex 5500A/WL manual

Page 8

4a) The printer will ask “ENTER # SITES: 1 or 3”.

There are two alternative measurement methods.

One Site Measurement - The measurement is on the midpoint biceps of the dominant arm (the arm used for writing).

NOTE: If “1” is pressed, skip the following and go to Step 5.

Three Site Measurement - The measurement is made combining data from three body sites:

Biceps - The first measurements are at the midpoint of the biceps of the dominant arm; i.e., the arm used for writing. Measurement point on the front of the arm midway between the armpit and the inside of the elbow.

Triceps - The second measurements are at the midpoint of the triceps of the dominant arm. Measurement point on the back of the upper arm midway between the shoulder and elbow.

Thigh - The third measurements are at the thigh. Measurement point on the front of the thigh midway between groin line and the top of the patella (knee).

8

Image 8
Contents USER’S Manual FUTREX-5500A/WL Body FAT and Fitness Analyzer FUTREX-5000A/WL USER’S Manual Light Shield RS-232 Cable Locator Fitness Wheel SoftwarePreparation Printer Paper Installation FUTREX-5500A/WL Models of the Futrex Body Composition AnalyzerFUTREX-5500A/ZL Percent Body Fat Measurement To Estimate Percent Body FATPage Page Page Less than 7.5 inches Frequency Intensity TimePage Selecting the Measurement Site Selecting the Triceps Measuring Site Selecting the Thigh Measuring SiteAdjusting The Percent Body Fat Reading Estimating Relative Fat Distribution Page Displaying the Date Changing the DateConnecting the Futrex to a Computer Printout Programs Fitness AnalysisPage Page Update Fitness Analysis Enter Youth Fitness Analysis Color Fitness Analysis Reports Function Mode Page Page Page Page Troubleshooting Problem Probable Cause Corrective MeasuresMay occur Problem Probable Cause Corrective Measures For More Information or ASSISTANCE, Call General Specifications Keypad Descriptions