Futrex 5500A/WL manual Problem Probable Cause Corrective Measures

PROBLEM	PROBABLE CAUSE	CORRECTIVE MEASURES
4) Unusually high body fat estimates	a) Too much light present during the	a) Do not lift the Light Wand from the
(40-50%)	measurement.	subject’s biceps until a “2” appears on the
		screen during the first estimation or the
		printer starts printing after the second
		estimation.
		b) Use the Light Shield to block the
		external light. Always avoid
		measurements under strong lights (e.g.
		direct sunlight) because errors may occur.
5) Printer Stops	a) Low batteries.	a) Replace batteries (see page 4).
	b) Bad battery contact.	b) Remove batteries and clean tabs with
	c) Bad AC connection.	isopropyl alcohol (rubbing alcohol).
		c) Unplug the AC Adapter from the wall
		socket and from the unit. Clean the
		adapter contact with isopropyl alcohol
		(rubbing alcohol).

36