Harbor Freight Tools 98982 operating instructions For technical questions, please call

Page 3

ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.

c. Do not expose the Scale to rain or wet conditions. Water entering the Scale will increase the risk of electric shock.

d.Do not abuse the Power Cord (17). Never use the Cord for car- rying, pulling or unplugging the Cord. Keep the Cord away from heat, oil, sharp edges or moving parts. Damaged or entangled Cords increase the risk of electric shock.

e.When operating the Scale out- doors, use an extension cord suit- able for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f. If operating the Scale in a damp

location is unavoidable, use a Ground Fault Circuit Interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.

3.Personal safety

a.Stay alert, watch what you are do- ing and use common sense when operating the Scale. Do not use the Scale while you are tired or un- der the influence of drugs, alcohol or medication. A moment of inatten- tion while operating the Scale may result in serious personal injury.

b.Use safety equipment. Always wear eye protection. Safety equip- ment such as ANSI-approved safety impact goggles will reduce personal injuries.

c.Prevent unintentional starting. Ensure the Power Switch (15) is in the off-position before connect-

ing to power source and/or bat- tery pack, picking up or carrying the tool. Carrying battery operated equipment with your finger on the Power Switch or energizing equip- ment that have the Power Switch on invites accidents.

d.Do not overreach. Keep proper footing and balance at all times. This enables better control of the Scale in unexpected situations.

4.Scale use and care

a.Do not force the Scale. Use the correct Scale for your application.

The correct Scale will do the job bet- ter and safer at the rate for which it was designed.

b.Do not use the Scale if the Power

Switch (15) does not turn it on and off. Any equipment that cannot be controlled with the Power Switch is dangerous and must be repaired.

c. Unplug the Power Cord (17) before making any adjustments, changing accessories, or storing the Scale.

Such preventive safety measures reduce the risk of starting the equip- ment accidentally.

d.Store idle equipment out of the reach of children and do not allow persons unfamiliar with the Scale or these instructions to oper- ate the equipment. Line powered and battery powered equipment are dangerous in the hands of untrained users.

e.Maintain the Scale. Check for misalignment or binding of mov- ing parts, breakage of parts and any other condition that may affect the Scale’s operation. If damaged, have the Scale repaired before

SKU 98982

For technical questions, please call 1-800-444-3353.

Page 3

Image 3
Contents Distributed exclusively by Harbor Freight Tools For technical questions or replacement parts, please callGeneral Safety Warnings Save This ManualFor technical questions, please call For technical questions, please call This Scale is not legal for trade or postage Specific Safety WarningsGrounded Tools Tools with Three Prong Plugs GroundingSee Table a SymbologyExtension Cords See 3-Prong Plug and OutletUnpacking SpecificationsAssembly Instructions Scale Set UpGeneral Operating Instructions See Figures B and CSee Figure B Hold SettingsZero/Tare UnitError Information CalibrationOL--- = Overload Maintenance Servicing See Figure FSKU For technical questions, please call Parts List & Assembly Diagram Record Product’s Serial Number Here Limited 90 DAY Warranty