Harbor Freight Tools 98982 Specifications, Unpacking, Operating Instructions, Scale Set Up

			Symbology
		Underwriters Laboratories, Inc.
V~		Volts Alternating Current
A		Amperes
n0 xxxx/min.		No Load Revolutions per Minute
		(RPM)
Specifications
	Input: 110 VAC~ / 60 Hz
Electrical	Battery Type: 6 VDC Sealed Lead Acid
Requirements	Power Switch: ON/Off Rocker Switch
	Power Plug: 3-Prong, Grounded
Maximum
Weight	330 Pounds (150 kilograms)
Capacity
	Auto Turn Off When Under Voltage
	Count
Main Functions	Limit Set
	Auto Zero Track
	Keyboard Calibration
	Overload Alarm
Control
Panel Button	ADD, C, HOLD, FUNC, ZERO/TARE, UNIT
Indicators
Additional	Four Adjustable Feet & Level Indicator for
	Leveling of Scale.
Features
	Built-In Rechargeable Battery.

Unpacking

When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

Operating Instructions

Read the entire Important Safety Information section at the beginning of this manual including all text under

subheadings therein before set up or use of this product.

To prevent serious injury

from accidental operation:

Turn the Power Switch (15) to its off position and unplug the Power Cord (17) before performing any inspection, maintenance, or cleaning procedures.

Assembly Instructions

DISPLAY

(1)

STEEL TUBE		FIGURE A
(4)
		STEEL BASE
	(5)
		BOLTS
	(6)

Attach the Display (1) and Steel Tube

(4)to the Steel Base (5) of the Scale using four Bolts (6). (See Figure A.)

Scale Set Up

1.Place the Scale on a clean, dry, flat, level surface capable of supporting the weight of the Scale and all ob- jects to be weighed.

2.The work area must be free of vibra- tion, strong air currents, direct sun- shine, and high temperature.

SKU 98982 For technical questions, please call 1-800-444-3353. Page 7