Maintenance And
Servicing
Procedures not specifically explained in this manual must be performed only by a qualified technician.
To prevent serious injury
from accidental operation:
Turn the Power Switch (15) of the Scale to its “OFF” position and unplug the unit’s Power Cord (17) from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
To prevent serious injury from EQUIPMENT failure:
Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
1.BEFORE EACH USE: Inspect the general condition of the Scale. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, Battery leakage, and any other condition that may affect its safe operation.
2.BATTERY REPLACEMENT: A Bat- tery that fails to accept a charge is an indication the Battery should be replaced. To replace the Battery:
BATTERY
(16)
FIGURE F
•Unscrew and remove the six Screws (18) located on the back panel of the Display (1).
(See Figure F.)
•Remove the front portion of the Dis- play (1) to expose the Battery (16).
(See Figure F.)
•Remove the old Battery (16) and replace with a new Battery of the same type. Then,
(See Figure F.)
•IMPORTANT: The old Battery (16) must be recycled according to local solid waste authority instructions.
3.After Use: Clean all external surfaces of the Scale with soft, clean cloth. Do not use solvents. Do not immerse the Scale in liquid.
4.
WARNING! If the Power Cord (17) is damaged, it must be re- placed only by a qualified service technician.
SKU 98982 | For technical questions, please call | Page 11 |