Operations, Scale Functions, Turning the Scale on

SECTION 4: OPERATIONS

Scale Functions

Hold LED Display
		Tare LED Display
		��
Tare Button	��	��
		ON/OFF Button
	��	��
	Load Stable LED Display	Remote Receiver Window

Figure 4. Scale face.

Turning the Scale ON

After your crane scale has been properly suspended, familiarize yourself with the functions both on the scale and on the remote control. Begin by holding down the ON/OFF button on the scale to turn it ON (Figure 4). Each time the scale is turned on, it will flash a series of displays. Use the table below to familiarize yourself with the display and its meanings.

Function Display	Action
Off/On 2000	Maximum capacity in Kg.
U X.XX Current battery voltage
99999	Warming up
88888
77777
66666
55555
44444
33333
22222
11111
00000

-XX Current weight

0 Steady light will engage, ready

To guarantee accuracy for your crane scale, allow it warm up without a load for 3-5 minutes.

-6-

Tare Function

The tare function will allow you to auto- matically deduct the weight of the weigh- ing platforms or containers, resulting in a final weight of only the items that you want weighed (the net weight). When your scale is ready, attach your weighing platform to the lifting hook at the bottom of the scale, then wait until the "STEADY" light comes on. Before placing any items on the plat- form, deduct the weight of the platform by pressing the TARE button on the scale (Figure 4), or by pressing Tare on the remote control. After you have selected the Tare function for the platform, the scale will return to 0 lbs. between loads until you turn off the scale.

Power Saving

If the load is left at stable status, ("STEADY" as shown in Figure 4), for longer than 15 minutes, the screen will flash "–" to save power and will return to normal weighing readings when the load is changed. If the load is left at stable status for over 60 minutes, the scale will turn OFF automati- cally.

Model T10008 2000 Kg Digital Crane Scale