Cisco Systems OL-11497-03 manual AC Power Distribution Unit

Chapter 3 Installing the Router

Connecting to an AC Power Source

Figure 3-18 AC Power Distribution Unit

1

4

3

5

			6
			57650
			2
1	Captive screws (four)	4	AC power distribution unit
2	AC power cord receptacle A	5	Guide pin
3	AC power cord receptacle B	6	Blower module connector

To connect AC power to the AC PDU on the router, see Figure 3-18and follow these steps:

Step 1 Attach an ESD-preventive strap to your wrist and connect the leash to the chassis or to another grounded, bare metal surface.

	Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03		3-31